Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Where is fire-rated drywall required?

The standard Prince Charles fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Prince Charles project needs.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Do you install fire-rated drywall in Prince Charles?

Yes — fire-rated drywall in Prince Charles is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Prince Charles ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Fire-Rated Drywall Prince Charles Edmonton | Type X Board

Fire-rated drywall in Prince Charles, built as a complete assembly

No shortcuts on Prince Charles fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Prince Charles we install fire-rated drywall to code and finish it clean. Prince Charles is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Prince Charles, Boyle Street, Central McDougall, Dovercourt and Central, 7 days a week.

Penetrations firestopped before the finish goes on
Rated assemblies installed and sealed correctly
Furnace and mechanical room enclosures
Garage ceilings and garage-to-house separations in Prince Charles
Type X board to the assembly on the drawings
Garage-to-house firewall separations
Joints taped as part of the rated assembly, not just for looks

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Prince Charles build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Prince Charles drywall in context

About Prince Charles

Situated on land once own by prominent citizens N.

What we see in Prince Charles

In Prince Charles the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Prince Charles assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Prince Charles assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Common fire-rated situations in Prince Charles

In Prince Charles, prince Charles sits in Edmonton's Central district. Situated on land once own by prominent citizens N. McCauley and A. Wilson, Prince Charles was first subdivided in 1905 and was annexed in 1910. Across roughly 600 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Prince Charles and the surrounding Central district, 7 days a week. That is the standard on every job here, big or small — on-site quote, fixed price.

Fire-rated garages, suites and party walls in Prince Charles

Garage firewalls

The most common fire-rated job in Prince Charles is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Prince Charles homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Fire-rated drywall in a Prince Charles garage ceiling

The most common one we do

Where Prince Charles living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Prince Charles Edmonton

Free quote

We come out to your Prince Charles Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Prince Charles Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Prince Charles Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Prince Charles Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Prince Charles Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Prince Charles Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Prince Charles Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Prince Charles Edmonton

Fire-Rated Drywall Prince Charles Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Where is fire-rated drywall required?: The standard Prince Charles fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Prince Charles project needs.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Do you install fire-rated drywall in Prince Charles?: Yes — fire-rated drywall in Prince Charles is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Prince Charles ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Prince Charles Edmonton

Fire-rated drywall in Prince Charles, built as a complete assembly