Will it pass inspection in Parkdale?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Parkdale separation passes inspection.

Can you finish the fire-rated board too?

Yes — your Parkdale separation passes code and looks properly finished, ready for paint.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Parkdale garages where storage access was cut in afterwards and never addressed.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Do you install fire-rated drywall in Parkdale?

Yes — fire-rated drywall in Parkdale is part of our regular work, and we are usually booked within the week. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

Fire-Rated Drywall Parkdale Edmonton | Type X Board

Type X board in Parkdale for garages, suites and mechanical rooms

Most fire-rated work we do in Parkdale is one of four things: a garage ceiling under living space, a party wall between units, a furnace or mechanical room, or a legal-suite separation. Each has its own assembly, and the drawings or the building official decide which one applies — not us and not the supplier.

Garage ceilings and garage-to-house separations in Parkdale
Party walls and legal-suite separations
Joints taped as part of the rated assembly, not just for looks
Parkdale coverage — we come to you
Furnace and mechanical room enclosures
Finished clean and inspection-ready
Penetrations firestopped before the finish goes on

Fire-rated drywall in a Parkdale garage ceiling

The most common one we do

Where Parkdale living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Parkdale drywall in context

About Parkdale

Parkdale is a low-density residential neighbourhood close to the inner city featuring primarily single-family homes as well as some commercial and industrial areas.

What we see in Parkdale

In Parkdale the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Parkdale garages where storage access was cut in afterwards and never addressed.

What makes drywall fire-rated in Parkdale

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Parkdale we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Parkdale are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

What affects the cost of fire-rated drywall in Parkdale?

Area and assembly

The cost in Parkdale depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Parkdale rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Parkdale

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Parkdale project passes the first time.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Parkdale assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Parkdale Edmonton

Free quote

We come out to your Parkdale Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Parkdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Parkdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Parkdale Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Parkdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Parkdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Parkdale Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Parkdale Edmonton

Fire-Rated Drywall Parkdale Edmonton: your questions answered

Will it pass inspection in Parkdale?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Parkdale separation passes inspection.
Can you finish the fire-rated board too?: Yes — your Parkdale separation passes code and looks properly finished, ready for paint.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Parkdale garages where storage access was cut in afterwards and never addressed.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Do you install fire-rated drywall in Parkdale?: Yes — fire-rated drywall in Parkdale is part of our regular work, and we are usually booked within the week. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Parkdale Edmonton

Type X board in Parkdale for garages, suites and mechanical rooms