Can you finish the fire-rated board too?

Yes — your Queen Alexandra separation passes code and looks properly finished, ready for paint.

My Queen Alexandra garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Will it pass inspection in Queen Alexandra?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Queen Alexandra separation passes inspection.

Where is fire-rated drywall required?

The standard Queen Alexandra fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Queen Alexandra project needs.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Queen Alexandra garages where storage access was cut in afterwards and never addressed.

How do I know which rated assembly my Queen Alexandra project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Fire-Rated Drywall Queen Alexandra Edmonton | Type X Board

Type X board in Queen Alexandra for garages, suites and mechanical rooms

No shortcuts on Queen Alexandra fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Queen Alexandra we install fire-rated drywall to code and finish it clean. Queen Alexandra is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Queen Alexandra, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Rated assemblies installed and sealed correctly
Party walls and legal-suite separations
Garage-to-house firewall separations
Finished clean and inspection-ready
Basement legal-suite fire separations
Queen Alexandra coverage — we come to you
Garage ceilings and garage-to-house separations in Queen Alexandra

Why Queen Alexandra homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Queen Alexandra we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Queen Alexandra and Scona, 7 days a week. Fixed pricing on free Queen Alexandra quotes, a clean site and a guarantee on the work. When an Queen Alexandra job is not right, we make it right — on us.

Queen Alexandra drywall in context

About Queen Alexandra

Queen Alexandra, named for the wife of Edward VII of England, was once part of the original Town of Strathcona.

What we see in Queen Alexandra

In Queen Alexandra the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Where Queen Alexandra homes usually need rated board

The four common places

Most rated drywall in Queen Alexandra houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Queen Alexandra project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Queen Alexandra drawings and tell you if what is on site does not match it.

Fire-rated garages, suites and party walls in Queen Alexandra

Garage firewalls

The most common fire-rated job in Queen Alexandra is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Queen Alexandra homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Queen Alexandra are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Queen Alexandra wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Queen Alexandra Edmonton

Free quote

We come out to your Queen Alexandra Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Queen Alexandra Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Queen Alexandra Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Queen Alexandra Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Queen Alexandra Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Queen Alexandra Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Queen Alexandra Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Queen Alexandra Edmonton

Fire-Rated Drywall Queen Alexandra Edmonton: your questions answered

Can you finish the fire-rated board too?: Yes — your Queen Alexandra separation passes code and looks properly finished, ready for paint.
My Queen Alexandra garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Will it pass inspection in Queen Alexandra?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Queen Alexandra separation passes inspection.
Where is fire-rated drywall required?: The standard Queen Alexandra fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Queen Alexandra project needs.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Queen Alexandra garages where storage access was cut in afterwards and never addressed.
How do I know which rated assembly my Queen Alexandra project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Queen Alexandra Edmonton

Type X board in Queen Alexandra for garages, suites and mechanical rooms