Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Do you install fire-rated drywall in Miller?

Yes — fire-rated drywall in Miller is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Do you stand behind your fire-rated work in Miller?

Yes. We install to code and walk the Miller job with you, and if something is not right we come back and make it right.

My Miller garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Fire-Rated Drywall Miller Edmonton | Type X Board

Rated separations in Miller that pass inspection the first time

No shortcuts on Miller fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Miller we install fire-rated drywall to code and finish it clean. Miller is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Miller, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Basement legal-suite fire separations
Penetrations firestopped before the finish goes on
Joints taped as part of the rated assembly, not just for looks
Rated assemblies installed and sealed correctly
Party walls between units
Furnace and mechanical room enclosures
Type X board to the assembly on the drawings

Why Miller homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Miller we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Miller and Northeast, 7 days a week. Fixed pricing on free Miller quotes, a clean site and a guarantee on the work. When an Miller job is not right, we make it right — on us.

Miller drywall in context

About Miller

Miller was named after Abe William Miller, a Hungarian-born lawyer, politician and community volunteer.

What we see in Miller

In Miller the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Common fire-rated situations in Miller

In Miller, miller sits in Edmonton's Northeast district. Miller was named after Abe William Miller, a Hungarian-born lawyer, politician and community volunteer. Across roughly 1,135 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Miller and the surrounding Northeast district, 7 days a week. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Miller are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

What affects the cost of fire-rated drywall in Miller?

Area and assembly

The cost in Miller depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Miller rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Miller

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Miller project passes the first time.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Miller assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Fire-rated drywall in a Miller garage ceiling

The most common one we do

Where Miller living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Miller Edmonton

Free quote

We come out to your Miller Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Miller Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Miller Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Miller Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Miller Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Miller Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Miller Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Miller Edmonton

Fire-Rated Drywall Miller Edmonton: your questions answered

Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Do you install fire-rated drywall in Miller?: Yes — fire-rated drywall in Miller is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.
Do you stand behind your fire-rated work in Miller?: Yes. We install to code and walk the Miller job with you, and if something is not right we come back and make it right.
My Miller garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Miller Edmonton

Rated separations in Miller that pass inspection the first time