Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Where is fire-rated drywall required?

The standard Ramsay Heights fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Ramsay Heights project needs.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Will it pass inspection in Ramsay Heights?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Ramsay Heights separation passes inspection.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Ramsay Heights ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Fire-Rated Drywall Ramsay Heights Edmonton | Type X Board

Fire-rated drywall in Ramsay Heights, built as a complete assembly

In Ramsay Heights the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Ramsay Heights we install fire-rated drywall to code and finish it clean. Ramsay Heights is this established Whitemud community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Ramsay Heights, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Garage-to-house firewall separations
Party walls and legal-suite separations
Party walls between units
Furnace and mechanical room enclosures
Type X fire-rated board to code in Ramsay Heights
Penetrations firestopped before the finish goes on
Finished clean and inspection-ready

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Ramsay Heights house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Ramsay Heights drywall in context

About Ramsay Heights

Just south of Riverbend, Ramsay Heights offers a panoramic view of the city to the residents of single-family and multi-family homes.

What we see in Ramsay Heights

In Ramsay Heights the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Ramsay Heights assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Why Ramsay Heights homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Ramsay Heights we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Ramsay Heights and Whitemud, 7 days a week. Fixed pricing on free Ramsay Heights quotes, a clean site and a guarantee on the work. When an Ramsay Heights job is not right, we make it right — on us.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Ramsay Heights garages where storage access was cut in afterwards and never addressed.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Ramsay Heights wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Ramsay Heights. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Ramsay Heights Edmonton

Free quote

We come out to your Ramsay Heights Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Ramsay Heights Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Ramsay Heights Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ramsay Heights Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Ramsay Heights Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Ramsay Heights Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Ramsay Heights Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Ramsay Heights Edmonton

Fire-Rated Drywall Ramsay Heights Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Where is fire-rated drywall required?: The standard Ramsay Heights fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Ramsay Heights project needs.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Will it pass inspection in Ramsay Heights?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Ramsay Heights separation passes inspection.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Ramsay Heights ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Ramsay Heights Edmonton

Fire-rated drywall in Ramsay Heights, built as a complete assembly