Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Starling ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Can you finish the fire-rated board too?

Yes — your Starling separation passes code and looks properly finished, ready for paint.

My Starling garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Do you stand behind your fire-rated work in Starling?

Yes. We install to code and walk the Starling job with you, and if something is not right we come back and make it right.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Fire-Rated Drywall Starling Edmonton | Type X Board

Fire-rated drywall in Starling, installed to code

No shortcuts on Starling fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Starling we install fire-rated drywall to code and finish it clean. Starling is one of West Henday's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Starling, Breckenridge Greens, Edgemont, Glastonbury and West Henday, 7 days a week.

Garage ceilings and garage-to-house separations in Starling
Basement legal-suite fire separations
Joints taped as part of the rated assembly, not just for looks
Garage-to-house firewall separations
Type X board to the assembly on the drawings
Party walls and legal-suite separations
Party walls between units

Fire-rated drywall in a Starling garage ceiling

The most common one we do

Where Starling living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Starling assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Why Starling homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Starling we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Starling and West Henday, 7 days a week. Fixed pricing on free Starling quotes, a clean site and a guarantee on the work. When an Starling job is not right, we make it right — on us.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Starling are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Starling wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Starling house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Starling Edmonton

Free quote

We come out to your Starling Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Starling Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Starling Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Starling Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Starling Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Starling Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Starling Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Starling Edmonton

Fire-Rated Drywall Starling Edmonton: your questions answered

Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Starling ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Can you finish the fire-rated board too?: Yes — your Starling separation passes code and looks properly finished, ready for paint.
My Starling garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Do you stand behind your fire-rated work in Starling?: Yes. We install to code and walk the Starling job with you, and if something is not right we come back and make it right.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Starling Edmonton

Fire-rated drywall in Starling, installed to code