Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Kernohan garage ceiling and a living room do not need the same finish level.

Do you stand behind your fire-rated work in Kernohan?

Yes. We install to code and walk the Kernohan job with you, and if something is not right we come back and make it right.

Where is fire-rated drywall required?

The standard Kernohan fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Kernohan project needs.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Fire-Rated Drywall Kernohan Edmonton | Type X Board

Fire-rated drywall in Kernohan, built as a complete assembly

In Kernohan the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Kernohan we install fire-rated drywall to code and finish it clean. Kernohan is an Northeast community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Kernohan, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Finished clean and inspection-ready
Party walls between units
Type X board to the assembly on the drawings
Furnace and mechanical room enclosures
Party walls and legal-suite separations
Kernohan coverage — we come to you
Penetrations firestopped before the finish goes on

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Kernohan depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Kernohan drywall in context

About Kernohan

Named for an early pioneer farmer who operated a grocery store here in the 1880s and 90s, Kernohan was not annexed until 1961.

What we see in Kernohan

In Kernohan the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Where Kernohan homes usually need rated board

The four common places

Most rated drywall in Kernohan houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Kernohan project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Kernohan house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Kernohan. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Kernohan drawings and tell you if what is on site does not match it.

Why Kernohan homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Kernohan we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Kernohan and Northeast, 7 days a week. Fixed pricing on free Kernohan quotes, a clean site and a guarantee on the work. When an Kernohan job is not right, we make it right — on us.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Kernohan Edmonton

Free quote

We come out to your Kernohan Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Kernohan Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Kernohan Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kernohan Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Kernohan Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Kernohan Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Kernohan Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Kernohan Edmonton

Fire-Rated Drywall Kernohan Edmonton: your questions answered

Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Kernohan garage ceiling and a living room do not need the same finish level.
Do you stand behind your fire-rated work in Kernohan?: Yes. We install to code and walk the Kernohan job with you, and if something is not right we come back and make it right.
Where is fire-rated drywall required?: The standard Kernohan fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Kernohan project needs.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Kernohan Edmonton

Fire-rated drywall in Kernohan, built as a complete assembly