How do I know which rated assembly my Devon project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can you finish the fire-rated board too?

Yes — your Devon separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard Devon fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Devon project needs.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Fire-Rated Drywall Devon | Type X Board

Fire-rated drywall in Devon, built as a complete assembly

A fire-rated wall is not a board, it is an assembly. In Devon that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Penetrations firestopped before the finish goes on
Party walls and legal-suite separations
Finished clean and inspection-ready
Basement legal-suite fire separations
Garage ceilings and garage-to-house separations in Devon
Rated assemblies installed and sealed correctly
Type X board to the assembly on the drawings

What happens when an assembly is altered later

Every future trade is a risk

A rated Devon wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Why Devon homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Devon we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Devon and Edmonton, 7 days a week. Fixed pricing on free Devon quotes, a clean site and a guarantee on the work. When an Devon job is not right, we make it right — on us.

Fire-rated garages, suites and party walls in Devon

Garage firewalls

The most common fire-rated job in Devon is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Devon homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Devon wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Where Devon homes usually need rated board

The four common places

Most rated drywall in Devon houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Devon project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Devon build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Devon

Free quote

We come out to your Devon property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Devon starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Devon. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Devon home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Devon. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Devon Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Devon trusts for repair, restoration and finishing — rated on Google by Devon homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Devon.

Read our reviews on Google

FAQ — Fire-Rated Drywall Devon

Fire-Rated Drywall Devon: your questions answered

What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
How do I know which rated assembly my Devon project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Can you finish the fire-rated board too?: Yes — your Devon separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?: The standard Devon fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Devon project needs.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Devon

Fire-rated drywall in Devon, built as a complete assembly