Where is fire-rated drywall required?

The standard Lymburn fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Lymburn project needs.

Do you install fire-rated drywall in Lymburn?

Yes — fire-rated drywall in Lymburn is part of our regular work, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.

How do I know which rated assembly my Lymburn project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Lymburn garages where storage access was cut in afterwards and never addressed.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Lymburn ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Fire-Rated Drywall Lymburn Edmonton | Type X Board

Rated separations in Lymburn that pass inspection the first time

Most fire-rated work we do in Lymburn is one of four things: a garage ceiling under living space, a party wall between units, a furnace or mechanical room, or a legal-suite separation. Each has its own assembly, and the drawings or the building official decide which one applies — not us and not the supplier.

Rated assemblies installed and sealed correctly
Type X board to the assembly on the drawings
Lymburn coverage — we come to you
Party walls between units
Furnace and mechanical room enclosures
Joints taped as part of the rated assembly, not just for looks
Party walls and legal-suite separations

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Lymburn build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Lymburn drywall in context

About Lymburn

Lymburn (Attorney General from 1926 to 1935), one of the parks is named after Monsignor Walter Fitzgerald.

What we see in Lymburn

In Lymburn the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Lymburn

Garage firewalls

The most common fire-rated job in Lymburn is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Lymburn homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Lymburn. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

What happens when an assembly is altered later

Every future trade is a risk

A rated Lymburn wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Lymburn drawings and tell you if what is on site does not match it.

Why Lymburn homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Lymburn we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Lymburn and West Edmonton, 7 days a week. Fixed pricing on free Lymburn quotes, a clean site and a guarantee on the work. When an Lymburn job is not right, we make it right — on us.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Lymburn Edmonton

Free quote

We come out to your Lymburn Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Lymburn Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Lymburn Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lymburn Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Lymburn Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Lymburn Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Lymburn Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Lymburn Edmonton

Fire-Rated Drywall Lymburn Edmonton: your questions answered

Where is fire-rated drywall required?: The standard Lymburn fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Lymburn project needs.
Do you install fire-rated drywall in Lymburn?: Yes — fire-rated drywall in Lymburn is part of our regular work, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
How do I know which rated assembly my Lymburn project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Lymburn garages where storage access was cut in afterwards and never addressed.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Lymburn ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Lymburn Edmonton

Rated separations in Lymburn that pass inspection the first time