Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Do you install fire-rated drywall in Oleskiw?

Yes — fire-rated drywall in Oleskiw is part of our regular work, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.

How do I know which rated assembly my Oleskiw project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Oleskiw garages where storage access was cut in afterwards and never addressed.

Can you finish the fire-rated board too?

Yes — your Oleskiw separation passes code and looks properly finished, ready for paint.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Fire-Rated Drywall Oleskiw Edmonton | Type X Board

Rated separations in Oleskiw that pass inspection the first time

A fire-rated wall is not a board, it is an assembly. In Oleskiw that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Joints taped as part of the rated assembly, not just for looks
Type X board to the assembly on the drawings
Furnace and mechanical room enclosures
Party walls and legal-suite separations
Party walls between units
Oleskiw coverage — we come to you
Rated assemblies installed and sealed correctly

Fire-rated drywall in a Oleskiw garage ceiling

The most common one we do

Where Oleskiw living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Oleskiw drywall in context

About Oleskiw

One of the City's larger residential neighbourhoods, Okeskiw is located in the east close to Wolf Willow Ravine.

What we see in Oleskiw

In Oleskiw the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Oleskiw build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Fire-rated garages, suites and party walls in Oleskiw

Garage firewalls

The most common fire-rated job in Oleskiw is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Oleskiw homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Our Oleskiw fire-rated drywall process, step by step

Right board, right build-up

In Oleskiw we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Oleskiw separation the inspector approves and the eye approves too.

Why Oleskiw homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Oleskiw we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Oleskiw and West Edmonton, 7 days a week. Fixed pricing on free Oleskiw quotes, a clean site and a guarantee on the work. When an Oleskiw job is not right, we make it right — on us.

Finishing a rated wall in Oleskiw without compromising it

Rated first, pretty second

Taping on a rated assembly in Oleskiw does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Oleskiw Edmonton

Free quote

We come out to your Oleskiw Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Oleskiw Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Oleskiw Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Oleskiw Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Oleskiw Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Oleskiw Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Oleskiw Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Oleskiw Edmonton

Fire-Rated Drywall Oleskiw Edmonton: your questions answered

Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Do you install fire-rated drywall in Oleskiw?: Yes — fire-rated drywall in Oleskiw is part of our regular work, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
How do I know which rated assembly my Oleskiw project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Oleskiw garages where storage access was cut in afterwards and never addressed.
Can you finish the fire-rated board too?: Yes — your Oleskiw separation passes code and looks properly finished, ready for paint.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Oleskiw Edmonton

Rated separations in Oleskiw that pass inspection the first time