Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Brintnell garage ceiling and a living room do not need the same finish level.

Do you stand behind your fire-rated work in Brintnell?

Yes. We install to code and walk the Brintnell job with you, and if something is not right we come back and make it right.

Can you finish the fire-rated board too?

Yes — your Brintnell separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard Brintnell fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Brintnell project needs.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Brintnell garages where storage access was cut in afterwards and never addressed.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Brintnell ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Fire-Rated Drywall Brintnell Edmonton | Type X Board

Type X board in Brintnell for garages, suites and mechanical rooms

No shortcuts on Brintnell fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Brintnell we install fire-rated drywall to code and finish it clean. Brintnell is one of Northeast's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Brintnell, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Party walls between units
Penetrations firestopped before the finish goes on
Garage-to-house firewall separations
Rated assemblies installed and sealed correctly
Party walls and legal-suite separations
Type X board to the assembly on the drawings
Furnace and mechanical room enclosures

Fire-rated drywall in a Brintnell garage ceiling

The most common one we do

Where Brintnell living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Brintnell drywall in context

About Brintnell

The neighbourhood was named in honour of Wilfred Leigh Brintnell a pilot, who was well known for his pioneering trips across uncharted areas.

What we see in Brintnell

In Brintnell the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of fire-rated drywall in Brintnell?

Area and assembly

The cost in Brintnell depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Brintnell rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Brintnell

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Brintnell project passes the first time.

Finishing a rated wall in Brintnell without compromising it

Rated first, pretty second

Taping on a rated assembly in Brintnell does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Fire-rated garages, suites and party walls in Brintnell

Garage firewalls

The most common fire-rated job in Brintnell is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Brintnell homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Brintnell drawings and tell you if what is on site does not match it.

Why Brintnell homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Brintnell we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Brintnell and Northeast, 7 days a week. Fixed pricing on free Brintnell quotes, a clean site and a guarantee on the work. When an Brintnell job is not right, we make it right — on us.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Brintnell Edmonton

Free quote

We come out to your Brintnell Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Brintnell Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Brintnell Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Brintnell Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Brintnell Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Brintnell Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Brintnell Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Brintnell Edmonton

Fire-Rated Drywall Brintnell Edmonton: your questions answered

Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Brintnell garage ceiling and a living room do not need the same finish level.
Do you stand behind your fire-rated work in Brintnell?: Yes. We install to code and walk the Brintnell job with you, and if something is not right we come back and make it right.
Can you finish the fire-rated board too?: Yes — your Brintnell separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?: The standard Brintnell fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Brintnell project needs.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Brintnell garages where storage access was cut in afterwards and never addressed.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Brintnell ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Brintnell Edmonton

Type X board in Brintnell for garages, suites and mechanical rooms