Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Do you install fire-rated drywall in Oxford?

Yes — fire-rated drywall in Oxford is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

Where is fire-rated drywall required?

The standard Oxford fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Oxford project needs.

Can you finish the fire-rated board too?

Yes — your Oxford separation passes code and looks properly finished, ready for paint.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Oxford garage ceiling and a living room do not need the same finish level.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Oxford garages where storage access was cut in afterwards and never addressed.

Fire-Rated Drywall Oxford Edmonton | Type X Board

Fire-rated drywall in Oxford, built as a complete assembly

No shortcuts on Oxford fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Oxford we install fire-rated drywall to code and finish it clean. Oxford is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Oxford, Albany, Athlone, Baranow and Northwest, 7 days a week.

Garage ceilings and garage-to-house separations in Oxford
Basement legal-suite fire separations
Finished clean and inspection-ready
Garage-to-house firewall separations
Rated assemblies installed and sealed correctly
Type X fire-rated board to code in Oxford
Joints taped as part of the rated assembly, not just for looks

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Oxford assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Oxford drywall in context

About Oxford

The dominant residential form in Oxford is the single-detached house, which accounts for almost 90% of all units within the neighbourhood.

What we see in Oxford

In Oxford the drywall work is settling cracks/nail pops, basement development, builder-grade L4->L5 upgrades. We confirm what your home actually needs on site, in writing, before anything starts.

What makes drywall fire-rated in Oxford

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Oxford we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Oxford are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

What affects the cost of fire-rated drywall in Oxford?

Area and assembly

The cost in Oxford depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Oxford rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Oxford

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Oxford project passes the first time.

Where Oxford homes usually need rated board

The four common places

Most rated drywall in Oxford houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Oxford project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Oxford garages where storage access was cut in afterwards and never addressed.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Oxford Edmonton

Free quote

We come out to your Oxford Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Oxford Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Oxford Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Oxford Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Oxford Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Oxford Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Oxford Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Oxford Edmonton

Fire-Rated Drywall Oxford Edmonton: your questions answered

Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Do you install fire-rated drywall in Oxford?: Yes — fire-rated drywall in Oxford is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
Where is fire-rated drywall required?: The standard Oxford fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Oxford project needs.
Can you finish the fire-rated board too?: Yes — your Oxford separation passes code and looks properly finished, ready for paint.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Oxford garage ceiling and a living room do not need the same finish level.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Oxford garages where storage access was cut in afterwards and never addressed.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Oxford Edmonton

Fire-rated drywall in Oxford, built as a complete assembly