Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Where is fire-rated drywall required?

The standard Potter Greens fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Potter Greens project needs.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can you finish the fire-rated board too?

Yes — your Potter Greens separation passes code and looks properly finished, ready for paint.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Fire-Rated Drywall Potter Greens Edmonton | Type X Board

Rated separations in Potter Greens that pass inspection the first time

Where code requires it in Potter Greens, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Potter Greens we install fire-rated drywall to code and finish it clean. Potter Greens is an West Henday community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Potter Greens, Breckenridge Greens, Edgemont, Glastonbury and West Henday, 7 days a week.

Garage-to-house firewall separations
Type X board to the assembly on the drawings
Finished clean and inspection-ready
Joints taped as part of the rated assembly, not just for looks
Basement legal-suite fire separations
Furnace and mechanical room enclosures
Party walls between units

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Potter Greens. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

Potter Greens drywall in context

About Potter Greens

Potter Greens is a newer residential neighbourhood in west Edmonton, Alberta, Canada.

What we see in Potter Greens

In Potter Greens the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Why Potter Greens homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Potter Greens we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Potter Greens and West Henday, 7 days a week. Fixed pricing on free Potter Greens quotes, a clean site and a guarantee on the work. When an Potter Greens job is not right, we make it right — on us.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Potter Greens drawings and tell you if what is on site does not match it.

Where Potter Greens homes usually need rated board

The four common places

Most rated drywall in Potter Greens houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Potter Greens project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Potter Greens assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Potter Greens garages where storage access was cut in afterwards and never addressed.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Potter Greens Edmonton

Free quote

We come out to your Potter Greens Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Potter Greens Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Potter Greens Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Potter Greens Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Potter Greens Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Potter Greens Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Potter Greens Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Potter Greens Edmonton

Fire-Rated Drywall Potter Greens Edmonton: your questions answered

Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Where is fire-rated drywall required?: The standard Potter Greens fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Potter Greens project needs.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Can you finish the fire-rated board too?: Yes — your Potter Greens separation passes code and looks properly finished, ready for paint.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Potter Greens garages where storage access was cut in afterwards and never addressed.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Potter Greens Edmonton

Rated separations in Potter Greens that pass inspection the first time