Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Do you stand behind your fire-rated work in St. Albert?

Yes. We install to code and walk the St. Albert job with you, and if something is not right we come back and make it right.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in St. Albert garages where storage access was cut in afterwards and never addressed.

Where is fire-rated drywall required?

The standard St. Albert fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your St. Albert project needs.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Fire-Rated Drywall St. Albert | Type X Board

Rated separations in St. Albert that pass inspection the first time

No shortcuts on St. Albert fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In St. Albert we install fire-rated drywall to code and finish it clean. St. Albert is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover St. Albert, Edmonton and Edmonton, 7 days a week.

Party walls between units
Joints taped as part of the rated assembly, not just for looks
Party walls and legal-suite separations
Basement legal-suite fire separations
Finished clean and inspection-ready
St. Albert coverage — we come to you
Type X fire-rated board to code in St. Albert

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in St. Albert garages where storage access was cut in afterwards and never addressed.

St. Albert drywall in context

About St. Albert

Albert has a genuine mix of older and newer homes (about 54% pre-1991, 25% since 2000), so we see both plaster and stipple repair and new-build basement development.

What we see in St. Albert

In St. Albert the drywall work is both plaster and stipple repair and new-build basement development. We confirm what your home actually needs on site, in writing, before anything starts.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated St. Albert assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Why St. Albert homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in St. Albert we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across St. Albert and Edmonton, 7 days a week. Fixed pricing on free St. Albert quotes, a clean site and a guarantee on the work. When an St. Albert job is not right, we make it right — on us.

Our St. Albert fire-rated drywall process, step by step

Right board, right build-up

In St. Albert we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An St. Albert separation the inspector approves and the eye approves too.

Finishing a rated wall in St. Albert without compromising it

Rated first, pretty second

Taping on a rated assembly in St. Albert does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in St. Albert depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in St Albert

Free quote

We come out to your St Albert property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in St Albert starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in St Albert. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your St Albert home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in St Albert. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by St. Albert Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor St Albert trusts for repair, restoration and finishing — rated on Google by St. Albert homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in St Albert.

Read our reviews on Google

FAQ — Fire-Rated Drywall St. Albert

Fire-Rated Drywall St. Albert: your questions answered

Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Do you stand behind your fire-rated work in St. Albert?: Yes. We install to code and walk the St. Albert job with you, and if something is not right we come back and make it right.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in St. Albert garages where storage access was cut in afterwards and never addressed.
Where is fire-rated drywall required?: The standard St. Albert fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your St. Albert project needs.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall St. Albert

Rated separations in St. Albert that pass inspection the first time