Do you install fire-rated drywall in Beaumont?

Yes — fire-rated drywall in Beaumont is part of our regular work, and we are usually booked within the week. We also cover Edmonton and Edmonton.

Will it pass inspection in Beaumont?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Beaumont separation passes inspection.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Where is fire-rated drywall required?

The standard Beaumont fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Beaumont project needs.

How do I know which rated assembly my Beaumont project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Fire-Rated Drywall Beaumont | Type X Board

Rated separations in Beaumont that pass inspection the first time

No shortcuts on Beaumont fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Beaumont we install fire-rated drywall to code and finish it clean. Beaumont is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Beaumont, Edmonton and Edmonton, 7 days a week.

Furnace and mechanical room enclosures
Party walls and legal-suite separations
Garage ceilings and garage-to-house separations in Beaumont
Garage-to-house firewall separations
Penetrations firestopped before the finish goes on
Joints taped as part of the rated assembly, not just for looks
Basement legal-suite fire separations

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Beaumont house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Fire-rated drywall in a Beaumont garage ceiling

The most common one we do

Where Beaumont living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

What makes drywall fire-rated in Beaumont

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Beaumont we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Beaumont. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

Our Beaumont fire-rated drywall process, step by step

Right board, right build-up

In Beaumont we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Beaumont separation the inspector approves and the eye approves too.

Where Beaumont homes usually need rated board

The four common places

Most rated drywall in Beaumont houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Beaumont project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Beaumont

Free quote

We come out to your Beaumont property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Beaumont starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Beaumont. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Beaumont home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Beaumont. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Beaumont Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Beaumont trusts for repair, restoration and finishing — rated on Google by Beaumont homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Beaumont.

Read our reviews on Google

FAQ — Fire-Rated Drywall Beaumont

Fire-Rated Drywall Beaumont: your questions answered

Do you install fire-rated drywall in Beaumont?: Yes — fire-rated drywall in Beaumont is part of our regular work, and we are usually booked within the week. We also cover Edmonton and Edmonton.
Will it pass inspection in Beaumont?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Beaumont separation passes inspection.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Where is fire-rated drywall required?: The standard Beaumont fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Beaumont project needs.
How do I know which rated assembly my Beaumont project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Beaumont

Rated separations in Beaumont that pass inspection the first time