Will it pass inspection in Cloverdale?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Cloverdale separation passes inspection.

How do I know which rated assembly my Cloverdale project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Do you stand behind your fire-rated work in Cloverdale?

Yes. We install to code and walk the Cloverdale job with you, and if something is not right we come back and make it right.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Do you install fire-rated drywall in Cloverdale?

Yes — fire-rated drywall in Cloverdale is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Fire-Rated Drywall Cloverdale Edmonton | Type X Board

Fire-rated drywall in Cloverdale, installed to code

No shortcuts on Cloverdale fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Cloverdale we install fire-rated drywall to code and finish it clean. Cloverdale is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Cloverdale, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Basement legal-suite fire separations
Garage ceilings and garage-to-house separations in Cloverdale
Penetrations firestopped before the finish goes on
Garage-to-house firewall separations
Joints taped as part of the rated assembly, not just for looks
Type X board to the assembly on the drawings
Party walls and legal-suite separations

Why Cloverdale homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Cloverdale we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Cloverdale and Southeast, 7 days a week. Fixed pricing on free Cloverdale quotes, a clean site and a guarantee on the work. When an Cloverdale job is not right, we make it right — on us.

Cloverdale drywall in context

About Cloverdale

Cloverdale is situated along the south bank of the North Saskatchewan River near the centre of the city.

What we see in Cloverdale

In Cloverdale the drywall work is settling cracks/nail pops, basement development, builder-grade L4->L5 upgrades. We confirm what your home actually needs on site, in writing, before anything starts.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Cloverdale garages where storage access was cut in afterwards and never addressed.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Cloverdale assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

What happens when an assembly is altered later

Every future trade is a risk

A rated Cloverdale wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Cloverdale depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

What makes drywall fire-rated in Cloverdale

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Cloverdale we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Cloverdale Edmonton

Free quote

We come out to your Cloverdale Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Cloverdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Cloverdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Cloverdale Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Cloverdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Cloverdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Cloverdale Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Cloverdale Edmonton

Fire-Rated Drywall Cloverdale Edmonton: your questions answered

Will it pass inspection in Cloverdale?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Cloverdale separation passes inspection.
How do I know which rated assembly my Cloverdale project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Do you stand behind your fire-rated work in Cloverdale?: Yes. We install to code and walk the Cloverdale job with you, and if something is not right we come back and make it right.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Do you install fire-rated drywall in Cloverdale?: Yes — fire-rated drywall in Cloverdale is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Cloverdale Edmonton

Fire-rated drywall in Cloverdale, installed to code