Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Sifton Park garages where storage access was cut in afterwards and never addressed.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Sifton Park ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Where is fire-rated drywall required?

The standard Sifton Park fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Sifton Park project needs.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Sifton Park garage ceiling and a living room do not need the same finish level.

Fire-Rated Drywall Sifton Park Edmonton | Type X Board

Fire-rated drywall in Sifton Park, installed to code

No shortcuts on Sifton Park fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Sifton Park we install fire-rated drywall to code and finish it clean. Sifton Park is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Sifton Park, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Sifton Park coverage — we come to you
Type X fire-rated board to code in Sifton Park
Type X board to the assembly on the drawings
Joints taped as part of the rated assembly, not just for looks
Garage ceilings and garage-to-house separations in Sifton Park
Basement legal-suite fire separations
Finished clean and inspection-ready

Finishing a rated wall in Sifton Park without compromising it

Rated first, pretty second

Taping on a rated assembly in Sifton Park does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Sifton Park drywall in context

About Sifton Park

Sifton Park was named after the Honourable Arthur R.

What we see in Sifton Park

In Sifton Park the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Sifton Park wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Why Sifton Park homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Sifton Park we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Sifton Park and Northeast, 7 days a week. Fixed pricing on free Sifton Park quotes, a clean site and a guarantee on the work. When an Sifton Park job is not right, we make it right — on us.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Sifton Park assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Where Sifton Park homes usually need rated board

The four common places

Most rated drywall in Sifton Park houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Sifton Park project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Sifton Park. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Sifton Park Edmonton

Free quote

We come out to your Sifton Park Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Sifton Park Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Sifton Park Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Sifton Park Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Sifton Park Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Sifton Park Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Sifton Park Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Sifton Park Edmonton

Fire-Rated Drywall Sifton Park Edmonton: your questions answered

Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Sifton Park garages where storage access was cut in afterwards and never addressed.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Sifton Park ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Where is fire-rated drywall required?: The standard Sifton Park fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Sifton Park project needs.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Sifton Park garage ceiling and a living room do not need the same finish level.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Sifton Park Edmonton

Fire-rated drywall in Sifton Park, installed to code