Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

My Ellerslie Edmonton garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Ellerslie Edmonton garages where storage access was cut in afterwards and never addressed.

Do you stand behind your fire-rated work in Ellerslie Edmonton?

Yes. We install to code and walk the Ellerslie Edmonton job with you, and if something is not right we come back and make it right.

How do I know which rated assembly my Ellerslie Edmonton project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Fire-Rated Drywall Ellerslie Edmonton

Fire-rated drywall in Ellerslie Edmonton, built as a complete assembly

No shortcuts on Ellerslie Edmonton fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Ellerslie Edmonton we install fire-rated drywall to code and finish it clean. Ellerslie Edmonton is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Ellerslie Edmonton, Charlesworth, Decoteau, Ellerslie, Summerside, The Orchards At Ellerslie, Walker and Ellerslie Edmonton, 7 days a week.

Joints taped as part of the rated assembly, not just for looks
Party walls between units
Garage-to-house firewall separations
Penetrations firestopped before the finish goes on
Furnace and mechanical room enclosures
Ellerslie Edmonton coverage — we come to you
Rated assemblies installed and sealed correctly

What happens when an assembly is altered later

Every future trade is a risk

A rated Ellerslie Edmonton wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Ellerslie Edmonton depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Why Ellerslie Edmonton homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Ellerslie Edmonton we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Ellerslie Edmonton and Ellerslie Edmonton, 7 days a week. Fixed pricing on free Ellerslie Edmonton quotes, a clean site and a guarantee on the work. When an Ellerslie Edmonton job is not right, we make it right — on us.

Finishing a rated wall in Ellerslie Edmonton without compromising it

Rated first, pretty second

Taping on a rated assembly in Ellerslie Edmonton does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Ellerslie Edmonton wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Ellerslie Edmonton assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Ellerslie Edmonton

Free quote

We come out to your Ellerslie Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Ellerslie Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Ellerslie Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ellerslie Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Ellerslie Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Ellerslie Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Ellerslie Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Ellerslie Edmonton