Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Where is fire-rated drywall required?

The standard Decoteau fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Decoteau project needs.

Do you install fire-rated drywall in Decoteau?

Yes — fire-rated drywall in Decoteau is part of our regular work, and we are usually booked within the week. We also cover Charlesworth, Ellerslie, Summerside and Ellerslie.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Decoteau garages where storage access was cut in afterwards and never addressed.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Fire-Rated Drywall Decoteau Edmonton | Type X Board

Type X board in Decoteau for garages, suites and mechanical rooms

No shortcuts on Decoteau fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Decoteau we install fire-rated drywall to code and finish it clean. Decoteau is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Decoteau, Charlesworth, Ellerslie, Summerside and Ellerslie, 7 days a week.

Furnace and mechanical room enclosures
Garage-to-house firewall separations
Decoteau coverage — we come to you
Party walls and legal-suite separations
Garage ceilings and garage-to-house separations in Decoteau
Rated assemblies installed and sealed correctly
Basement legal-suite fire separations

Our Decoteau fire-rated drywall process, step by step

Right board, right build-up

In Decoteau we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Decoteau separation the inspector approves and the eye approves too.

Common fire-rated situations in Decoteau

In Decoteau, decoteau sits in Edmonton's Ellerslie district. Across roughly 105 homes here, the drywall work is verify dominant band before writing notes. We cover Decoteau and the surrounding Ellerslie district, 7 days a week. That is the standard on every job here, big or small — on-site quote, fixed price.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Decoteau are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Why Decoteau homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Decoteau we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Decoteau and Ellerslie, 7 days a week. Fixed pricing on free Decoteau quotes, a clean site and a guarantee on the work. When an Decoteau job is not right, we make it right — on us.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Decoteau. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

Fire-rated garages, suites and party walls in Decoteau

Garage firewalls

The most common fire-rated job in Decoteau is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Decoteau homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Decoteau Edmonton

Free quote

We come out to your Decoteau Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Decoteau Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Decoteau Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Decoteau Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Decoteau Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Decoteau Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Decoteau Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Decoteau Edmonton

Fire-Rated Drywall Decoteau Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Where is fire-rated drywall required?: The standard Decoteau fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Decoteau project needs.
Do you install fire-rated drywall in Decoteau?: Yes — fire-rated drywall in Decoteau is part of our regular work, and we are usually booked within the week. We also cover Charlesworth, Ellerslie, Summerside and Ellerslie.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Decoteau garages where storage access was cut in afterwards and never addressed.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Decoteau Edmonton

Type X board in Decoteau for garages, suites and mechanical rooms