My Terwillegar Towne garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Where is fire-rated drywall required?

The standard Terwillegar Towne fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Terwillegar Towne project needs.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Will it pass inspection in Terwillegar Towne?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Terwillegar Towne separation passes inspection.

Do you install fire-rated drywall in Terwillegar Towne?

Yes — fire-rated drywall in Terwillegar Towne is part of our regular work, and we are usually booked within the week. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Fire-Rated Drywall Terwillegar Towne Edmonton | Type X Board

Fire-rated drywall in Terwillegar Towne, installed to code

In Terwillegar Towne the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Terwillegar Towne we install fire-rated drywall to code and finish it clean. Terwillegar Towne is an Whitemud community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Terwillegar Towne, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Joints taped as part of the rated assembly, not just for looks
Finished clean and inspection-ready
Terwillegar Towne coverage — we come to you
Party walls between units
Furnace and mechanical room enclosures
Basement legal-suite fire separations
Penetrations firestopped before the finish goes on

Where Terwillegar Towne homes usually need rated board

The four common places

Most rated drywall in Terwillegar Towne houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Terwillegar Towne project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Terwillegar Towne build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Finishing a rated wall in Terwillegar Towne without compromising it

Rated first, pretty second

Taping on a rated assembly in Terwillegar Towne does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Terwillegar Towne house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

What affects the cost of fire-rated drywall in Terwillegar Towne?

Area and assembly

The cost in Terwillegar Towne depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Terwillegar Towne rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Terwillegar Towne

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Terwillegar Towne project passes the first time.

Our Terwillegar Towne fire-rated drywall process, step by step

Right board, right build-up

In Terwillegar Towne we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Terwillegar Towne separation the inspector approves and the eye approves too.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Terwillegar Towne Edmonton

Free quote

We come out to your Terwillegar Towne Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Terwillegar Towne Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Terwillegar Towne Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Terwillegar Towne Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Terwillegar Towne Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Terwillegar Towne Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Terwillegar Towne Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Terwillegar Towne Edmonton

Fire-Rated Drywall Terwillegar Towne Edmonton: your questions answered

My Terwillegar Towne garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Where is fire-rated drywall required?: The standard Terwillegar Towne fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Terwillegar Towne project needs.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Will it pass inspection in Terwillegar Towne?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Terwillegar Towne separation passes inspection.
Do you install fire-rated drywall in Terwillegar Towne?: Yes — fire-rated drywall in Terwillegar Towne is part of our regular work, and we are usually booked within the week. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Terwillegar Towne Edmonton

Fire-rated drywall in Terwillegar Towne, installed to code