Do you install fire-rated drywall in Beaumaris?

Yes — fire-rated drywall in Beaumaris is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Will it pass inspection in Beaumaris?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Beaumaris separation passes inspection.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Beaumaris garages where storage access was cut in afterwards and never addressed.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

How do I know which rated assembly my Beaumaris project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Fire-Rated Drywall Beaumaris Edmonton | Type X Board

Rated separations in Beaumaris that pass inspection the first time

A fire-rated wall is not a board, it is an assembly. In Beaumaris that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Garage-to-house firewall separations
Basement legal-suite fire separations
Type X board to the assembly on the drawings
Garage ceilings and garage-to-house separations in Beaumaris
Party walls between units
Type X fire-rated board to code in Beaumaris
Joints taped as part of the rated assembly, not just for looks

Where Beaumaris homes usually need rated board

The four common places

Most rated drywall in Beaumaris houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Beaumaris project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Beaumaris drywall in context

About Beaumaris

Part of the Castle Downs and Lake District Area, Beaumaris was named for a Welsh castle, and the neighbourhood's appealing architectural features reflect the castle theme.

What we see in Beaumaris

In Beaumaris the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Common fire-rated situations in Beaumaris

In Beaumaris, beaumaris sits in Edmonton's Northwest district. Part of the Castle Downs and Lake District Area, Beaumaris was named for a Welsh castle, and the neighbourhood's appealing architectural features reflect the castle theme. Across roughly 1,890 homes here, the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We cover Beaumaris and the surrounding Northwest district, 7 days a week. We handle all of it the same careful way — on-site quote, fixed price, done right.

What happens when an assembly is altered later

Every future trade is a risk

A rated Beaumaris wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Finishing a rated wall in Beaumaris without compromising it

Rated first, pretty second

Taping on a rated assembly in Beaumaris does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Beaumaris house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Beaumaris are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Beaumaris Edmonton

Free quote

We come out to your Beaumaris Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Beaumaris Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Beaumaris Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Beaumaris Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Beaumaris Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Beaumaris Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Beaumaris Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Beaumaris Edmonton

Fire-Rated Drywall Beaumaris Edmonton: your questions answered

Do you install fire-rated drywall in Beaumaris?: Yes — fire-rated drywall in Beaumaris is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Will it pass inspection in Beaumaris?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Beaumaris separation passes inspection.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Beaumaris garages where storage access was cut in afterwards and never addressed.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
How do I know which rated assembly my Beaumaris project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Beaumaris Edmonton

Rated separations in Beaumaris that pass inspection the first time