Where is fire-rated drywall required?

The standard Hazeldean fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Hazeldean project needs.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Do you install fire-rated drywall in Hazeldean?

Yes — fire-rated drywall in Hazeldean is part of our regular work, and we are usually booked within the week. We also cover Allendale, Argyll, Belgravia and Scona.

Can you finish the fire-rated board too?

Yes — your Hazeldean separation passes code and looks properly finished, ready for paint.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Do you stand behind your fire-rated work in Hazeldean?

Yes. We install to code and walk the Hazeldean job with you, and if something is not right we come back and make it right.

Fire-Rated Drywall Hazeldean Edmonton | Type X Board

Type X board in Hazeldean for garages, suites and mechanical rooms

In Hazeldean the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Hazeldean we install fire-rated drywall to code and finish it clean. Hazeldean is this established Scona community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Hazeldean, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Party walls and legal-suite separations
Type X fire-rated board to code in Hazeldean
Garage-to-house firewall separations
Furnace and mechanical room enclosures
Rated assemblies installed and sealed correctly
Joints taped as part of the rated assembly, not just for looks
Hazeldean coverage — we come to you

Fire-rated drywall in a Hazeldean garage ceiling

The most common one we do

Where Hazeldean living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Hazeldean drywall in context

About Hazeldean

Hazeldean is located on an area identified as the land holding of I.

What we see in Hazeldean

In Hazeldean the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Common fire-rated situations in Hazeldean

In Hazeldean, hazeldean sits in Edmonton's Scona district. Hazeldean is located on an area identified as the land holding of I. Irvine, W. Ogilvie and C. Anderson by the first river lot and township surveys of the Edmonton Settlement. Across roughly 1,335 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Hazeldean and the surrounding Scona district, 7 days a week. We handle all of it the same careful way — on-site quote, fixed price, done right.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Hazeldean build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Hazeldean drawings and tell you if what is on site does not match it.

What makes drywall fire-rated in Hazeldean

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Hazeldean we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Hazeldean assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Hazeldean Edmonton

Free quote

We come out to your Hazeldean Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Hazeldean Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Hazeldean Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hazeldean Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Hazeldean Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Hazeldean Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Hazeldean Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Hazeldean Edmonton

Fire-Rated Drywall Hazeldean Edmonton: your questions answered

Where is fire-rated drywall required?: The standard Hazeldean fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Hazeldean project needs.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Do you install fire-rated drywall in Hazeldean?: Yes — fire-rated drywall in Hazeldean is part of our regular work, and we are usually booked within the week. We also cover Allendale, Argyll, Belgravia and Scona.
Can you finish the fire-rated board too?: Yes — your Hazeldean separation passes code and looks properly finished, ready for paint.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Do you stand behind your fire-rated work in Hazeldean?: Yes. We install to code and walk the Hazeldean job with you, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Hazeldean Edmonton

Type X board in Hazeldean for garages, suites and mechanical rooms