Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Do you install fire-rated drywall in Keheewin?

Yes — fire-rated drywall in Keheewin is part of our regular work, and we are usually booked within the week. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Keheewin ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

My Keheewin garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Keheewin garage ceiling and a living room do not need the same finish level.

Fire-Rated Drywall Keheewin Edmonton | Type X Board

Rated separations in Keheewin that pass inspection the first time

Where code requires it in Keheewin, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Keheewin we install fire-rated drywall to code and finish it clean. Keheewin is an Whitemud community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Keheewin, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Joints taped as part of the rated assembly, not just for looks
Garage-to-house firewall separations
Type X fire-rated board to code in Keheewin
Party walls and legal-suite separations
Rated assemblies installed and sealed correctly
Garage ceilings and garage-to-house separations in Keheewin
Furnace and mechanical room enclosures

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Keheewin house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Keheewin drywall in context

About Keheewin

One of the City's newest neighbourhoods, development in Keheewin began in the 1990s.

What we see in Keheewin

In Keheewin the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Keheewin are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Common fire-rated situations in Keheewin

In Keheewin, keheewin sits in Edmonton's Whitemud district. One of the City's newest neighbourhoods, development in Keheewin began in the 1990s. Across roughly 1,210 homes here, the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We cover Keheewin and the surrounding Whitemud district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

What affects the cost of fire-rated drywall in Keheewin?

Area and assembly

The cost in Keheewin depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Keheewin rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Keheewin

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Keheewin project passes the first time.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Keheewin assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Finishing a rated wall in Keheewin without compromising it

Rated first, pretty second

Taping on a rated assembly in Keheewin does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Keheewin Edmonton

Free quote

We come out to your Keheewin Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Keheewin Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Keheewin Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Keheewin Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Keheewin Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Keheewin Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Keheewin Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Keheewin Edmonton

Fire-Rated Drywall Keheewin Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Do you install fire-rated drywall in Keheewin?: Yes — fire-rated drywall in Keheewin is part of our regular work, and we are usually booked within the week. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Keheewin ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
My Keheewin garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Keheewin garage ceiling and a living room do not need the same finish level.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Keheewin Edmonton

Rated separations in Keheewin that pass inspection the first time