Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Stony Plain ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Stony Plain garages where storage access was cut in afterwards and never addressed.

Do you install fire-rated drywall in Stony Plain?

Yes — fire-rated drywall in Stony Plain is part of our regular work, and we are usually booked within the week. We also cover Edmonton and Edmonton.

Fire-Rated Drywall Stony Plain | Type X Board

Type X board in Stony Plain for garages, suites and mechanical rooms

No shortcuts on Stony Plain fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Stony Plain we install fire-rated drywall to code and finish it clean. Stony Plain is one of Edmonton's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Stony Plain, Edmonton and Edmonton, 7 days a week.

Penetrations firestopped before the finish goes on
Basement legal-suite fire separations
Type X board to the assembly on the drawings
Garage ceilings and garage-to-house separations in Stony Plain
Party walls and legal-suite separations
Finished clean and inspection-ready
Stony Plain coverage — we come to you

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Stony Plain drawings and tell you if what is on site does not match it.

What happens when an assembly is altered later

Every future trade is a risk

A rated Stony Plain wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

What affects the cost of fire-rated drywall in Stony Plain?

Area and assembly

The cost in Stony Plain depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Stony Plain rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Stony Plain

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Stony Plain project passes the first time.

Where Stony Plain homes usually need rated board

The four common places

Most rated drywall in Stony Plain houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Stony Plain project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Fire-rated drywall in a Stony Plain garage ceiling

The most common one we do

Where Stony Plain living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Stony Plain depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Stony Plain

Free quote

We come out to your Stony Plain property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Stony Plain starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Stony Plain. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Stony Plain home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Stony Plain. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Stony Plain Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Stony Plain trusts for repair, restoration and finishing — rated on Google by Stony Plain homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Stony Plain.

Read our reviews on Google

FAQ — Fire-Rated Drywall Stony Plain

Fire-Rated Drywall Stony Plain: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Stony Plain ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Stony Plain garages where storage access was cut in afterwards and never addressed.
Do you install fire-rated drywall in Stony Plain?: Yes — fire-rated drywall in Stony Plain is part of our regular work, and we are usually booked within the week. We also cover Edmonton and Edmonton.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Stony Plain

Type X board in Stony Plain for garages, suites and mechanical rooms