Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Do you stand behind your fire-rated work in Henderson Estates?

Yes. We install to code and walk the Henderson Estates job with you, and if something is not right we come back and make it right.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Henderson Estates garage ceiling and a living room do not need the same finish level.

How do I know which rated assembly my Henderson Estates project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Fire-Rated Drywall Henderson Estates Edmonton | Type X Board

Fire-rated drywall in Henderson Estates, built as a complete assembly

No shortcuts on Henderson Estates fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Henderson Estates we install fire-rated drywall to code and finish it clean. Henderson Estates is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Henderson Estates, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Rated assemblies installed and sealed correctly
Penetrations firestopped before the finish goes on
Garage-to-house firewall separations
Type X fire-rated board to code in Henderson Estates
Finished clean and inspection-ready
Garage ceilings and garage-to-house separations in Henderson Estates
Henderson Estates coverage — we come to you

Finishing a rated wall in Henderson Estates without compromising it

Rated first, pretty second

Taping on a rated assembly in Henderson Estates does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Henderson Estates drywall in context

About Henderson Estates

Henderson Estates is named after Thomas Henderson, who was a homesteader in the Riverbend area in the late 19th century.

What we see in Henderson Estates

In Henderson Estates the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Where Henderson Estates homes usually need rated board

The four common places

Most rated drywall in Henderson Estates houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Henderson Estates project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

What affects the cost of fire-rated drywall in Henderson Estates?

Area and assembly

The cost in Henderson Estates depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Henderson Estates rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Henderson Estates

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Henderson Estates project passes the first time.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Henderson Estates assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Why Henderson Estates homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Henderson Estates we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Henderson Estates and Whitemud, 7 days a week. Fixed pricing on free Henderson Estates quotes, a clean site and a guarantee on the work. When an Henderson Estates job is not right, we make it right — on us.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Henderson Estates assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Henderson Estates Edmonton

Free quote

We come out to your Henderson Estates Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Henderson Estates Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Henderson Estates Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Henderson Estates Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Henderson Estates Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Henderson Estates Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Henderson Estates Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Henderson Estates Edmonton

Fire-Rated Drywall Henderson Estates Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Do you stand behind your fire-rated work in Henderson Estates?: Yes. We install to code and walk the Henderson Estates job with you, and if something is not right we come back and make it right.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Henderson Estates garage ceiling and a living room do not need the same finish level.
How do I know which rated assembly my Henderson Estates project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Henderson Estates Edmonton

Fire-rated drywall in Henderson Estates, built as a complete assembly