Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

My Glengarry garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Glengarry ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Will it pass inspection in Glengarry?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Glengarry separation passes inspection.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Fire-Rated Drywall Glengarry Edmonton | Type X Board

Rated separations in Glengarry that pass inspection the first time

No shortcuts on Glengarry fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Glengarry we install fire-rated drywall to code and finish it clean. Glengarry is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Glengarry, Albany, Athlone, Baranow and Northwest, 7 days a week.

Party walls and legal-suite separations
Type X fire-rated board to code in Glengarry
Rated assemblies installed and sealed correctly
Basement legal-suite fire separations
Glengarry coverage — we come to you
Garage ceilings and garage-to-house separations in Glengarry
Garage-to-house firewall separations

Where Glengarry homes usually need rated board

The four common places

Most rated drywall in Glengarry houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Glengarry project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Glengarry drywall in context

About Glengarry

Glengarry is a diverse mix of commercial, residential, institutional and recreational land uses.

What we see in Glengarry

In Glengarry the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Glengarry build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Glengarry are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Common fire-rated situations in Glengarry

In Glengarry, glengarry sits in Edmonton's Northwest district. Glengarry is a diverse mix of commercial, residential, institutional and recreational land uses. Across roughly 1,195 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Glengarry and the surrounding Northwest district, 7 days a week. That is the standard on every job here, big or small — on-site quote, fixed price.

Why Glengarry homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Glengarry we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Glengarry and Northwest, 7 days a week. Fixed pricing on free Glengarry quotes, a clean site and a guarantee on the work. When an Glengarry job is not right, we make it right — on us.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Glengarry assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Glengarry Edmonton

Free quote

We come out to your Glengarry Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Glengarry Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Glengarry Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Glengarry Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Glengarry Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Glengarry Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Glengarry Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Glengarry Edmonton

Fire-Rated Drywall Glengarry Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
My Glengarry garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Glengarry ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Will it pass inspection in Glengarry?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Glengarry separation passes inspection.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Glengarry Edmonton

Rated separations in Glengarry that pass inspection the first time