Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Argyll garage ceiling and a living room do not need the same finish level.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Argyll garages where storage access was cut in afterwards and never addressed.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Fire-Rated Drywall Argyll Edmonton | Type X Board

Type X board in Argyll for garages, suites and mechanical rooms

No shortcuts on Argyll fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Argyll we install fire-rated drywall to code and finish it clean. Argyll is one of Scona's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Argyll, Allendale, Belgravia, CPR Irvine and Scona, 7 days a week.

Furnace and mechanical room enclosures
Rated assemblies installed and sealed correctly
Joints taped as part of the rated assembly, not just for looks
Type X board to the assembly on the drawings
Garage ceilings and garage-to-house separations in Argyll
Garage-to-house firewall separations
Basement legal-suite fire separations

Common fire-rated situations in Argyll

In Argyll, argyll sits in Edmonton's Scona district. At the turn of the 20th Century, Argyll was part of a half-section of land owned by J. Eamer. Across roughly 340 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Argyll and the surrounding Scona district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

Argyll drywall in context

About Argyll

At the turn of the 20th Century, Argyll was part of a half-section of land owned by J.

What we see in Argyll

In Argyll the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of fire-rated drywall in Argyll?

Area and assembly

The cost in Argyll depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Argyll rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Argyll

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Argyll project passes the first time.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Argyll garages where storage access was cut in afterwards and never addressed.

Where Argyll homes usually need rated board

The four common places

Most rated drywall in Argyll houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Argyll project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Argyll drawings and tell you if what is on site does not match it.

Fire-rated garages, suites and party walls in Argyll

Garage firewalls

The most common fire-rated job in Argyll is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Argyll homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Argyll Edmonton

Free quote

We come out to your Argyll Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Argyll Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Argyll Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Argyll Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Argyll Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Argyll Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Argyll Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Argyll Edmonton

Fire-Rated Drywall Argyll Edmonton: your questions answered

Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Argyll garage ceiling and a living room do not need the same finish level.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Argyll garages where storage access was cut in afterwards and never addressed.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Argyll Edmonton

Type X board in Argyll for garages, suites and mechanical rooms