How do I know which rated assembly my Alberta Avenue project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Alberta Avenue garage ceiling and a living room do not need the same finish level.

My Alberta Avenue garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Where is fire-rated drywall required?

The standard Alberta Avenue fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Alberta Avenue project needs.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Fire-Rated Drywall Alberta Avenue Edmonton | Type X Board

Fire-rated drywall in Alberta Avenue, built as a complete assembly

A fire-rated wall is not a board, it is an assembly. In Alberta Avenue that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Basement legal-suite fire separations
Finished clean and inspection-ready
Furnace and mechanical room enclosures
Joints taped as part of the rated assembly, not just for looks
Garage ceilings and garage-to-house separations in Alberta Avenue
Party walls between units
Type X fire-rated board to code in Alberta Avenue

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Alberta Avenue are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Alberta Avenue drywall in context

About Alberta Avenue

One of the city's older residential neighbourhoods, Alberta Avenue is located in the inner city.

What we see in Alberta Avenue

In Alberta Avenue the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Finishing a rated wall in Alberta Avenue without compromising it

Rated first, pretty second

Taping on a rated assembly in Alberta Avenue does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Alberta Avenue depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Alberta Avenue assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Fire-rated garages, suites and party walls in Alberta Avenue

Garage firewalls

The most common fire-rated job in Alberta Avenue is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Alberta Avenue homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Alberta Avenue wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Alberta Avenue Edmonton

Free quote

We come out to your Alberta Avenue Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Alberta Avenue Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Alberta Avenue Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Alberta Avenue Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Alberta Avenue Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Alberta Avenue Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Alberta Avenue Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Alberta Avenue Edmonton

Fire-Rated Drywall Alberta Avenue Edmonton: your questions answered

How do I know which rated assembly my Alberta Avenue project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Alberta Avenue garage ceiling and a living room do not need the same finish level.
My Alberta Avenue garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Where is fire-rated drywall required?: The standard Alberta Avenue fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Alberta Avenue project needs.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Alberta Avenue Edmonton

Fire-rated drywall in Alberta Avenue, built as a complete assembly