Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

My Idylwylde garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Do you install fire-rated drywall in Idylwylde?

Yes — fire-rated drywall in Idylwylde is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Fire-Rated Drywall Idylwylde Edmonton | Type X Board

Type X board in Idylwylde for garages, suites and mechanical rooms

In Idylwylde the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Idylwylde we install fire-rated drywall to code and finish it clean. Idylwylde is an Southeast community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Idylwylde, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Penetrations firestopped before the finish goes on
Rated assemblies installed and sealed correctly
Finished clean and inspection-ready
Party walls and legal-suite separations
Garage ceilings and garage-to-house separations in Idylwylde
Garage-to-house firewall separations
Idylwylde coverage — we come to you

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Idylwylde garages where storage access was cut in afterwards and never addressed.

Idylwylde drywall in context

About Idylwylde

Idylwylde is bounded by four major roadways, which serve to keep the area's centre quiet.

What we see in Idylwylde

In Idylwylde the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Idylwylde

Garage firewalls

The most common fire-rated job in Idylwylde is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Idylwylde homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Idylwylde drawings and tell you if what is on site does not match it.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Idylwylde wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

What affects the cost of fire-rated drywall in Idylwylde?

Area and assembly

The cost in Idylwylde depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Idylwylde rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Idylwylde

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Idylwylde project passes the first time.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Idylwylde house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Idylwylde Edmonton

Free quote

We come out to your Idylwylde Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Idylwylde Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Idylwylde Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Idylwylde Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Idylwylde Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Idylwylde Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Idylwylde Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Idylwylde Edmonton

Fire-Rated Drywall Idylwylde Edmonton: your questions answered

Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
My Idylwylde garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Do you install fire-rated drywall in Idylwylde?: Yes — fire-rated drywall in Idylwylde is part of our regular work, and we are usually booked within the week. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Idylwylde Edmonton

Type X board in Idylwylde for garages, suites and mechanical rooms