Can you finish the fire-rated board too?

Yes — your Evergreen separation passes code and looks properly finished, ready for paint.

How do I know which rated assembly my Evergreen project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

My Evergreen garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Evergreen ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Where is fire-rated drywall required?

The standard Evergreen fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Evergreen project needs.

Fire-Rated Drywall Evergreen Edmonton | Type X Board

Rated separations in Evergreen that pass inspection the first time

No shortcuts on Evergreen fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Evergreen we install fire-rated drywall to code and finish it clean. Evergreen is one of Horse Hill's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Evergreen, Rural North East Horse Hill, Rural North East South Sturgeon and Horse Hill, 7 days a week.

Type X fire-rated board to code in Evergreen
Finished clean and inspection-ready
Furnace and mechanical room enclosures
Joints taped as part of the rated assembly, not just for looks
Basement legal-suite fire separations
Penetrations firestopped before the finish goes on
Type X board to the assembly on the drawings

Where Evergreen homes usually need rated board

The four common places

Most rated drywall in Evergreen houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Evergreen project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Evergreen drywall in context

About Evergreen

Evergreen is a mobile home park is nested in a beautiful, naturally wooded ravine in north east Edmonton.

What we see in Evergreen

In Evergreen the drywall work is verify dominant band before writing notes. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in Evergreen

Garage firewalls

The most common fire-rated job in Evergreen is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Evergreen homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Evergreen assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Evergreen build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Evergreen are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Evergreen garages where storage access was cut in afterwards and never addressed.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Evergreen Edmonton

Free quote

We come out to your Evergreen Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Evergreen Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Evergreen Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Evergreen Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Evergreen Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Evergreen Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Evergreen Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Evergreen Edmonton

Fire-Rated Drywall Evergreen Edmonton: your questions answered

Can you finish the fire-rated board too?: Yes — your Evergreen separation passes code and looks properly finished, ready for paint.
How do I know which rated assembly my Evergreen project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
My Evergreen garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Evergreen ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Where is fire-rated drywall required?: The standard Evergreen fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Evergreen project needs.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Evergreen Edmonton

Rated separations in Evergreen that pass inspection the first time