Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

How do I know which rated assembly my Tweddle Place project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Do you stand behind your fire-rated work in Tweddle Place?

Yes. We install to code and walk the Tweddle Place job with you, and if something is not right we come back and make it right.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Tweddle Place ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Fire-Rated Drywall Tweddle Place Edmonton | Type X Board

Type X board in Tweddle Place for garages, suites and mechanical rooms

No shortcuts on Tweddle Place fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Tweddle Place we install fire-rated drywall to code and finish it clean. Tweddle Place is one of Mill Woods and Meadows's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Tweddle Place, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Party walls between units
Joints taped as part of the rated assembly, not just for looks
Type X board to the assembly on the drawings
Furnace and mechanical room enclosures
Type X fire-rated board to code in Tweddle Place
Garage-to-house firewall separations
Basement legal-suite fire separations

Where Tweddle Place homes usually need rated board

The four common places

Most rated drywall in Tweddle Place houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Tweddle Place project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Tweddle Place drywall in context

About Tweddle Place

Tweedle Place was named in honour of Malcolm Tweddle, a former City Commissioner.

What we see in Tweddle Place

In Tweddle Place the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated drywall in a Tweddle Place garage ceiling

The most common one we do

Where Tweddle Place living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

What makes drywall fire-rated in Tweddle Place

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Tweddle Place we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

What affects the cost of fire-rated drywall in Tweddle Place?

Area and assembly

The cost in Tweddle Place depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Tweddle Place rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Tweddle Place

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Tweddle Place project passes the first time.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Tweddle Place depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Tweddle Place garages where storage access was cut in afterwards and never addressed.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Tweddle Place Edmonton

Free quote

We come out to your Tweddle Place Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Tweddle Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Tweddle Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Tweddle Place Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Tweddle Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Tweddle Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Tweddle Place Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Tweddle Place Edmonton

Fire-Rated Drywall Tweddle Place Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
How do I know which rated assembly my Tweddle Place project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Do you stand behind your fire-rated work in Tweddle Place?: Yes. We install to code and walk the Tweddle Place job with you, and if something is not right we come back and make it right.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Tweddle Place ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Tweddle Place Edmonton

Type X board in Tweddle Place for garages, suites and mechanical rooms