Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Will it pass inspection in McQueen?

Yes — we install the correct Type X assembly and seal penetrations to spec so your McQueen separation passes inspection.

Do you stand behind your fire-rated work in McQueen?

Yes. We install to code and walk the McQueen job with you, and if something is not right we come back and make it right.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Can you finish the fire-rated board too?

Yes — your McQueen separation passes code and looks properly finished, ready for paint.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Fire-Rated Drywall McQueen Edmonton | Type X Board

Fire-rated drywall in McQueen, installed to code

No shortcuts on McQueen fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In McQueen we install fire-rated drywall to code and finish it clean. McQueen is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover McQueen, Britannia Youngstown, Canora, Crestwood and Jasper Place, 7 days a week.

Type X fire-rated board to code in McQueen
Garage ceilings and garage-to-house separations in McQueen
Finished clean and inspection-ready
Furnace and mechanical room enclosures
Rated assemblies installed and sealed correctly
Party walls between units
McQueen coverage — we come to you

What makes drywall fire-rated in McQueen

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In McQueen we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in McQueen are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your McQueen house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an McQueen build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated McQueen assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Why McQueen homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in McQueen we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across McQueen and Jasper Place, 7 days a week. Fixed pricing on free McQueen quotes, a clean site and a guarantee on the work. When an McQueen job is not right, we make it right — on us.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Mcqueen Edmonton

Free quote

We come out to your Mcqueen Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Mcqueen Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Mcqueen Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Mcqueen Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Mcqueen Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Mcqueen Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Mcqueen Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall McQueen Edmonton

Fire-Rated Drywall McQueen Edmonton: your questions answered

Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Will it pass inspection in McQueen?: Yes — we install the correct Type X assembly and seal penetrations to spec so your McQueen separation passes inspection.
Do you stand behind your fire-rated work in McQueen?: Yes. We install to code and walk the McQueen job with you, and if something is not right we come back and make it right.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Can you finish the fire-rated board too?: Yes — your McQueen separation passes code and looks properly finished, ready for paint.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall McQueen Edmonton

Fire-rated drywall in McQueen, installed to code