Fire-Rated Drywall Northwest Edmonton

Fire-Rated Drywall Northwest Edmonton

Fire-Rated Drywall
Fire-Rated Drywall Edmonton

Fire separation drywall in Northwest Edmonton, Edmonton — rated board, rated joints and firestopped penetrations, finished so the assembly is intact and the room is paint-ready.

Get My Free Quote Call (403) 829-8702

Emplastrum Drywall 5-Star Google Reviews
Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing
Fire-rated drywall in Northwest Edmonton, built as a complete assembly

Fire-rated drywall in Northwest Edmonton, built as a complete assembly

Most fire-rated work we do in Northwest Edmonton is one of four things: a garage ceiling under living space, a party wall between units, a furnace or mechanical room, or a legal-suite separation. Each has its own assembly, and the drawings or the building official decide which one applies — not us and not the supplier.

Watch

Fire-Rated Drywall Northwest Edmonton

Watch fire-rated drywall jobs in Northwest Edmonton on our YouTube channel

Why Northwest Edmonton homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Northwest Edmonton we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Northwest Edmonton and Northwest Edmonton, 7 days a week. Fixed pricing on free Northwest Edmonton quotes, a clean site and a guarantee on the work. When an Northwest Edmonton job is not right, we make it right — on us.

Fire-Rated Drywall in every Northwest Edmonton community

Where we work in Northwest Edmonton

We cover fire-rated drywall across Northwest Edmonton. Pick your community below for the detail that applies to your street.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Northwest Edmonton build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Northwest Edmonton drawings and tell you if what is on site does not match it.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Northwest Edmonton garages where storage access was cut in afterwards and never addressed.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Northwest Edmonton assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Northwest Edmonton depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.
How it works

Simple, clean, on schedule — Fire-Rated Drywall in Northwest Edmonton

1

Free quote

We come out to your Northwest Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Northwest Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Northwest Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Northwest Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Northwest Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Northwest Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Northwest Edmonton.

Read our reviews on Google
FAQ — Fire-Rated Drywall Northwest Edmonton

Fire-Rated Drywall Northwest Edmonton: your questions answered

Do you install fire-rated drywall in Northwest Edmonton?
Yes — fire-rated drywall in Northwest Edmonton is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow, Baturyn, Beaumaris, Belle Rive and Northwest Edmonton.
Can I use 1/2 inch board if that is what is on site?
Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Do you handle the firestopping as well as the board?
We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Where is fire-rated drywall required?
The standard Northwest Edmonton fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Northwest Edmonton project needs.
Is Type X the same as fireproof?
No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Do you stand behind your fire-rated work in Northwest Edmonton?
Yes. We install to code and walk the Northwest Edmonton job with you, and if something is not right we come back and make it right.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Fire-Rated Drywall in every Northwest Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook