Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Rated separations in Jasper Place Edmonton that pass inspection the first time

Most fire-rated work we do in Jasper Place Edmonton is one of four things: a garage ceiling under living space, a party wall between units, a furnace or mechanical room, or a legal-suite separation. Each has its own assembly, and the drawings or the building official decide which one applies — not us and not the supplier.

Fire-Rated Drywall Jasper Place Edmonton

Watch fire-rated drywall jobs in Jasper Place Edmonton on our YouTube channel

Finishing a rated wall in Jasper Place Edmonton without compromising it

Rated first, pretty second

Taping on a rated assembly in Jasper Place Edmonton does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Fire-Rated Drywall in every Jasper Place Edmonton community

Where we work in Jasper Place Edmonton

We cover fire-rated drywall across Jasper Place Edmonton. Pick your community below for the detail that applies to your street.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Jasper Place Edmonton garages where storage access was cut in afterwards and never addressed.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Jasper Place Edmonton are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Jasper Place Edmonton assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Jasper Place Edmonton house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Jasper Place Edmonton depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Simple, clean, on schedule — Fire-Rated Drywall in Jasper Place Edmonton

1

Free quote

We come out to your Jasper Place Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Jasper Place Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Jasper Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Jasper Place Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Jasper Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Jasper Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Jasper Place Edmonton.

Read our reviews on Google

Fire-Rated Drywall Jasper Place Edmonton: your questions answered

Can I put an access hatch in my rated garage ceiling?
Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Jasper Place Edmonton garages where storage access was cut in afterwards and never addressed.
Is a fire-rated wall also soundproof?
It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Does the rated wall have to go above the ceiling?
Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Do you handle the firestopping as well as the board?
We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Do you install fire-rated drywall in Jasper Place Edmonton?
Yes — fire-rated drywall in Jasper Place Edmonton is part of our regular work, and we are usually booked within the week. We also cover Britannia Youngstown, Canora, Crestwood, Elmwood, Glenwood, Grovenor and Jasper Place Edmonton.
Where is fire-rated drywall required?
The standard Jasper Place Edmonton fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Jasper Place Edmonton project needs.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Fire-Rated Drywall in every Jasper Place Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook