Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Northwest Edmonton. The Northwest Edmonton ceiling board is carried in part by the wall board butting under it. In Northwest Edmonton, reversing the boarding order leaves ceiling joints unsupported and prone to cracking. No Northwest Edmonton wall board goes up before the ceiling is complete.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

For Northwest Edmonton exterior basement walls, what board do you use?

In Northwest Edmonton, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Northwest Edmonton home.

How long does drywall installation take in an Northwest Edmonton home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Northwest Edmonton are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Can the taping crew start right after you board an Northwest Edmonton home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Northwest Edmonton.

What board do you use for exterior basement walls in Northwest Edmonton?

Moisture-resistant board covers the Northwest Edmonton foundation walls and the plumbing and laundry zones. Standard 1/2” board on dry Northwest Edmonton interior walls. The Northwest Edmonton suite build: fire-rated 5/8” Type X ceiling, soundproofed party walls. We lock the Northwest Edmonton board spec per surface at quote time.

Drywall Installation Northwest Edmonton

Drywall installation in Northwest Edmonton — hung straight, screwed off right

A good Northwest Edmonton finish starts with good boarding. In Northwest Edmonton the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Northwest Edmonton is one of Northwest Edmonton’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Northwest Edmonton, Ambleton, Albany, Athlone, Baranow, Baturyn, Beaumaris, Belle Rive and the surrounding area, 7 days a week.

Correct screw pattern and every seam on framing in Northwest Edmonton
Right screw pattern, all seams landed on framing in Northwest Edmonton
Moisture-resistant board for Northwest Edmonton exterior and wet-area walls
Fire-rated 5/8” Type X on suite ceilings where required
Northwest Edmonton exterior walls and wet areas get moisture-resistant board
Fire-rated and soundproof board for Northwest Edmonton legal-suite separations
In Northwest Edmonton, correct screw spacing and seams on framing throughout

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Northwest Edmonton bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Northwest Edmonton, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. The Northwest Edmonton ceiling finishes before any wall boarding starts.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Northwest Edmonton corners, inside and outside, come out square and clean. Board never runs past the openings on Northwest Edmonton jobs. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

What affects the cost of drywall installation in Northwest Edmonton?

Square footage, board type and ceiling complexity in Northwest Edmonton

The cost of drywall installation in Northwest Edmonton comes down to four main factors: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are different costs), ceiling complexity (flat vs. vaulted areas, bulkheads and soffits take longer), plus whether it is new build or reno around Northwest Edmonton fixtures and trades. We measure on site and give you a fixed price before we start.

Board spec for Northwest Edmonton homes — right product on every surface

Not every surface in a Northwest Edmonton home needs the same board. Exterior foundation walls need moisture-resistant. Moisture-resistant board on all Northwest Edmonton bathroom and laundry walls. In Northwest Edmonton, suite ceilings take 5/8” Type X fire-rated. A Northwest Edmonton suite party wall gains from STC soundproof board. In Northwest Edmonton, moisture-free interior walls use standard 1/2” board. Each Northwest Edmonton surface gets its product at the quote, before any inspector flags it.

Drywall installation work we do in Northwest Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Northwest Edmonton, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Why Northwest Edmonton homeowners call Emplastrum

Fixed price, Level 4 standard, 7 days a week in Northwest Edmonton

We give Northwest Edmonton homeowners a fixed price at the on-site quote. The number does not change. We tape every joint to Level 4, match every texture precisely and leave the surface paint-ready when we leave.

We cover Northwest Edmonton, Albany, Athlone, Baranow, Baturyn, Beaumaris, Belle Rive and surrounding communities

Free on-site quotes, same-day reply, 7 days a week. Call or text ' . emp_phone() . '.

What affects the cost of drywall installation in Northwest Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Northwest Edmonton comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Northwest Edmonton

The work here usually calls for settling cracks, aging stipple and the odd plaster repair. We map every Northwest Edmonton surface at the quote and specify the right product so there are no surprises at inspection.

How it works

Simple, clean, on schedule — Drywall Installation in Northwest Edmonton

Free quote

We come out to your Northwest Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Northwest Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Northwest Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Northwest Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Northwest Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Northwest Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Northwest Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Northwest Edmonton