Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Does Caernarvon taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Caernarvon.

What board do you use for exterior basement walls in Caernarvon?

Every Caernarvon foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Caernarvon interior walls away from moisture take standard 1/2” board. Caernarvon suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Caernarvon surface is set at the on-site quote.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

What board do you use on exterior basement walls in Edmonton?

In Caernarvon, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Caernarvon interior walls get standard 1/2” board. Legal suites in Caernarvon take 5/8” Type X on the ceiling and soundproof party walls. Each Caernarvon surface gets its board product confirmed at the quote.

Drywall Installation Caernarvon Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

Good drywall installation is what makes a good Caernarvon finish possible. We hang Caernarvon board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Caernarvon homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Caernarvon, Albany, Athlone, Baranow and the surrounding area, 7 days a week.

Caernarvon coverage — we come to you
Left ready for taper — no rework needed
Caernarvon boarding left tape-ready, no rework for the finishers
Caernarvon basements boarded in order: ceiling, then walls
Basement development boarding in Caernarvon — ceiling first, then walls
Exterior and wet-area Caernarvon walls boarded moisture-resistant
In Caernarvon, correct screw spacing and seams on framing throughout

Why Caernarvon homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Caernarvon taping problem we have fixed was a boarding problem first. We board every Caernarvon job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Caernarvon and Northwest, 7 days a week. For Caernarvon homeowners: free quote, fixed number, backed workmanship. Any issue on an Caernarvon boarding job earns a return trip and a proper fix.

Caernarvon drywall in context

About Caernarvon

One of the Castle Downs subdivisions, Caernarvon is named for a castle in Wales.

What we see in Caernarvon

In Caernarvon the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Albany, Athlone, Baranow — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Albany, Athlone, Baranow — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Drywall installation work we do in Caernarvon in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Caernarvon, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Ceilings first, then walls

The order is not arbitrary

Ceiling board goes up first so the wall sheets push up underneath and support its edges.

What it prevents

Doing it the other way leaves the ceiling perimeter unsupported, and in an Caernarvon room that is where the cracking starts. It also gives a tighter joint at the wall-ceiling line, which is the joint people look at most.

Our drywall installation process in Caernarvon in Edmonton, step by step

Ceiling board first — always — in Caernarvon homes

Every boarding job in Caernarvon starts with the ceiling. In Caernarvon we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Caernarvon order and the ceiling joints go unsupported and crack. In Caernarvon, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Caernarvon

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Caernarvon, every seam lands on framing, never mid-bay. In Caernarvon, every inside and outside corner is square and clean. In Caernarvon, board stops clean at window and door frames. When the boarding is done in an Caernarvon home, every surface is at the right plane and the taping crew can go straight to work.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Caernarvon homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Caernarvon and Albany, Athlone, Baranow

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Caernarvon, Albany, Athlone, Baranow and surrounding communities. Call or text ' . emp_phone() . '.

How it works

Simple, clean, on schedule — Drywall Installation in Caernarvon Edmonton

Free quote

We come out to your Caernarvon Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Caernarvon Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Caernarvon Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Caernarvon Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Caernarvon Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Caernarvon Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Caernarvon Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Caernarvon Edmonton

Drywall Installation Caernarvon Edmonton: your questions answered

Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
Does Caernarvon taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Caernarvon.
What board do you use for exterior basement walls in Caernarvon?: Every Caernarvon foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Caernarvon interior walls away from moisture take standard 1/2” board. Caernarvon suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Caernarvon surface is set at the on-site quote.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
What board do you use on exterior basement walls in Edmonton?: In Caernarvon, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Caernarvon interior walls get standard 1/2” board. Legal suites in Caernarvon take 5/8” Type X on the ceiling and soundproof party walls. Each Caernarvon surface gets its board product confirmed at the quote.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Caernarvon Edmonton

Drywall installation hung straight and screwed off right