How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Wellington: the quoted timeline is the real one. The taping crew can usually start the next day.

Do you do drywall installation in Wellington?

Yes — Wellington is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

What board do you use on exterior basement walls in Edmonton?

In Wellington, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Wellington interior walls get standard 1/2” board. Legal suites in Wellington take 5/8” Type X on the ceiling and soundproof party walls. Each Wellington surface gets its board product confirmed at the quote.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Is drywall installation in Wellington a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Drywall Installation Wellington Edmonton | Board & Tape

Drywall installation in Wellington, hung straight and screwed off right

In Wellington, the finish rides on the install — seams on framing, right screw pattern, board plumb pre-mud. In Wellington we board new builds, basements and renovations the way a finishing specialist wants it boarded. Wellington is this established Northwest community where reno, repair and ceiling drywall are common, so the installation work here is usually settling cracks, nail pops and tired texture. We cover Wellington, Albany, Athlone, Baranow and Northwest, 7 days a week.

Ceiling-then-walls basement boarding across Wellington
STC soundproof board on party walls for legal suites
Left ready for taper — no rework needed
Wellington board hung on the correct screw pattern, seams on framing
Wellington basements boarded in order: ceiling, then walls
Fire-rated and soundproof board for Wellington legal-suite separations
Moisture-resistant board on Wellington exterior walls and wet areas

Board layout is decided before the first sheet

Where the joints land

On an Wellington wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

What affects the cost of drywall installation in Wellington in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Wellington comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Wellington

The work here usually calls for settling cracks, nail pops and tired texture. The Wellington quote maps each surface to its correct board — no inspection surprises.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Albany, Athlone, Baranow and Edmonton, 7 days a week — every established and newer Edmonton community from Albany, Athlone, Baranow to Albany, Athlone, Baranow. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Drywall board types used in Wellington homes

Standard 1/2” drywall — the right choice for most Wellington walls

Standard 1/2” drywall is correct for interior walls and ceilings in Wellington homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Wellington walls and ceilings should be. Most interior walls and ceilings in Wellington homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Wellington

Exterior basement walls in Wellington homes need moisture-resistant board. In Wellington, every bathroom and laundry wall takes moisture-resistant board. An Wellington suite ceiling must carry 5/8” Type X fire-rated board. In Wellington, the suite-to-main party wall takes STC soundproof board. The right board per Wellington surface is set at the quote for a clean inspection.

Types of Drywall Installation work in Wellington in Edmonton

New installs, renovation work and repair in Wellington

We handle the full range of drywall installation work in Wellington — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Wellington

Legal suite work in Wellington requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Albany, Athlone, Baranow — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Albany, Athlone, Baranow — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

How it works

Simple, clean, on schedule — Drywall Installation in Wellington Edmonton

Free quote

We come out to your Wellington Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Wellington Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Wellington Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Wellington Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Wellington Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Wellington Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Wellington Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Wellington Edmonton

Drywall Installation Wellington Edmonton: your questions answered

How long does drywall installation take in a Edmonton home in Edmonton?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Wellington: the quoted timeline is the real one. The taping crew can usually start the next day.
Do you do drywall installation in Wellington in Edmonton?: Yes — Wellington is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
What board do you use on exterior basement walls in Edmonton?: In Wellington, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Wellington interior walls get standard 1/2” board. Legal suites in Wellington take 5/8” Type X on the ceiling and soundproof party walls. Each Wellington surface gets its board product confirmed at the quote.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
Is drywall installation in Wellington a fixed price in Edmonton?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Wellington Edmonton

Drywall installation in Wellington, hung straight and screwed off right