What board do you use for exterior basement walls in Evansdale?

Every Evansdale foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Evansdale interior walls away from moisture take standard 1/2” board. Evansdale suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Evansdale surface is set at the on-site quote.

Do you stand behind your installation work in Evansdale?

Yes. Before leaving Evansdale, we walk the boarding together and fix anything not right.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

How long does drywall installation take in a Evansdale home?

A standard basement in a Evansdale home typically takes one to two days to board. New construction or a big reno in Evansdale runs a longer schedule. The Evansdale timeline you get at the quote is realistic, not optimistic. In Evansdale, finishing usually begins the day after boarding wraps.

How long does drywall installation take in an Evansdale home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Evansdale are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Do you do drywall installation in Evansdale?

Yes — Evansdale is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

Drywall Installation Evansdale Edmonton | Board & Tape

Drywall installation in Evansdale, hung straight and screwed off right

Good drywall installation is what makes a good Evansdale finish possible — seams on framing, the right screw pattern, board plumb before a single coat of mud goes on. In Evansdale we board new builds, basements and renovations the way a finishing specialist wants it boarded. Evansdale is an older Northwest community where settling cracks, aging texture and the occasional plaster repair come up, so the installation work here is usually settling cracks, aging stipple and the odd plaster repair. We cover Evansdale, Albany, Athlone, Baranow and Northwest, 7 days a week.

Moisture-resistant board for Evansdale exterior and wet-area walls
No rework in Evansdale: tape-ready boarding when we go
Basement boarding — ceiling first, walls second
Evansdale boarding left tape-ready, no rework for the finishers
Drywall boarding and hanging — new builds and renovations
Tape-ready Evansdale boarding, nothing for the taping crew to fix
In Evansdale, correct screw spacing and seams on framing throughout

Our Drywall Installation process in Evansdale in Edmonton

Assess before we start — always in Evansdale

Every job in Evansdale starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Evansdale

When we leave your Evansdale home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Board layout is decided before the first sheet

Where the joints land

On an Evansdale wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Drywall board types used in Evansdale homes

Standard 1/2” drywall — the right choice for most Evansdale walls

Standard 1/2” drywall is correct for interior walls and ceilings in Evansdale homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Evansdale walls and ceilings should be. Most interior walls and ceilings in Evansdale homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Evansdale

Exterior basement walls in Evansdale homes need moisture-resistant board. In Evansdale, every bathroom and laundry wall takes moisture-resistant board. An Evansdale suite ceiling must carry 5/8” Type X fire-rated board. In Evansdale, the suite-to-main party wall takes STC soundproof board. The right board per Evansdale surface is set at the quote for a clean inspection.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Albany, Athlone, Baranow — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Albany, Athlone, Baranow — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Evansdale room where they will show through the finish.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Evansdale suite party walls. We specify the right product for each surface before we pull the first sheet.

How it works

Simple, clean, on schedule — Drywall Installation in Evansdale Edmonton

Free quote

We come out to your Evansdale Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Evansdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Evansdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Evansdale Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Evansdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Evansdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Evansdale Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Evansdale Edmonton

Drywall Installation Evansdale Edmonton: your questions answered

What board do you use for exterior basement walls in Evansdale?: Every Evansdale foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Evansdale interior walls away from moisture take standard 1/2” board. Evansdale suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Evansdale surface is set at the on-site quote.
Do you stand behind your installation work in Evansdale?: Yes. Before leaving Evansdale, we walk the boarding together and fix anything not right.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
How long does drywall installation take in a Evansdale home in Edmonton?: A standard basement in a Evansdale home typically takes one to two days to board. New construction or a big reno in Evansdale runs a longer schedule. The Evansdale timeline you get at the quote is realistic, not optimistic. In Evansdale, finishing usually begins the day after boarding wraps.
How long does drywall installation take in an Evansdale home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Evansdale are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
Do you do drywall installation in Evansdale in Edmonton?: Yes — Evansdale is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Evansdale Edmonton

Drywall installation in Evansdale, hung straight and screwed off right