What board do you use on Albany exterior basement walls?

Moisture-resistant board on all Albany exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Albany home.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

What board do you use on exterior basement walls in Edmonton?

In Albany, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Albany interior walls get standard 1/2” board. Legal suites in Albany take 5/8” Type X on the ceiling and soundproof party walls. Each Albany surface gets its board product confirmed at the quote.

Do you board for legal suites in Albany?

Yes, and we know the spec. A legal secondary suite in Albany requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Albany suites board and pass inspection.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Drywall Installation Albany Edmonton | Board & Tape

Drywall installation in Albany — hung straight, screwed off right

Good drywall installation is what makes a good Albany finish possible. We hang Albany board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Albany homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Albany, Athlone, Baranow, Baturyn and the surrounding area, 7 days a week.

Fire-rated 5/8” Type X on suite ceilings where required
Albany legal-suite separations get fire-rated and soundproof board
Albany boarding left tape-ready, no rework for the finishers
Correct screw pattern and every seam on framing in Albany
Ready for taping when we leave an Albany job — no rework
No rework in Albany — the board is ready for tape when we go
Exterior and wet-area Albany walls boarded moisture-resistant

About Drywall Installation in Albany in Edmonton

Drywall Installation in Albany — what to expect

We provide drywall installation services in Albany and surrounding communities, 7 days a week. Albany is one of Northwest’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Northwest area.

Fixed price — assessed on site in Albany

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Our Albany drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Albany starts with the ceiling, because the wall board butts up under it and helps carry it. In Albany, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Albany, completed boarding hands straight to taping with nothing to fix.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Athlone, Baranow, Baturyn — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Athlone, Baranow, Baturyn — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Drywall installation work we do in Albany in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Albany, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Our drywall installation process in Albany in Edmonton, step by step

Ceiling board first — always — in Albany homes

Every boarding job in Albany starts with the ceiling. In Albany we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Albany order and the ceiling joints go unsupported and crack. In Albany, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Albany

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Albany, every seam lands on framing, never mid-bay. In Albany, every inside and outside corner is square and clean. In Albany, board stops clean at window and door frames. When the boarding is done in an Albany home, every surface is at the right plane and the taping crew can go straight to work.

Drywall board types used in Albany homes

Standard 1/2” drywall — the right choice for most Albany walls

Standard 1/2” drywall is correct for interior walls and ceilings in Albany homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Albany walls and ceilings should be. Most interior walls and ceilings in Albany homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Albany

Exterior basement walls in Albany homes need moisture-resistant board. In Albany, every bathroom and laundry wall takes moisture-resistant board. An Albany suite ceiling must carry 5/8” Type X fire-rated board. In Albany, the suite-to-main party wall takes STC soundproof board. The right board per Albany surface is set at the quote for a clean inspection.

How it works

Simple, clean, on schedule — Drywall Installation in Albany Edmonton

Free quote

We come out to your Albany Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Albany Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Albany Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Albany Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Albany Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Albany Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Albany Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Albany Edmonton

Drywall Installation Albany Edmonton: your questions answered

What board do you use on Albany exterior basement walls?: Moisture-resistant board on all Albany exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Albany home.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
What board do you use on exterior basement walls in Edmonton?: In Albany, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Albany interior walls get standard 1/2” board. Legal suites in Albany take 5/8” Type X on the ceiling and soundproof party walls. Each Albany surface gets its board product confirmed at the quote.
Do you board for legal suites in Albany?: Yes, and we know the spec. A legal secondary suite in Albany requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Albany suites board and pass inspection.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
Is drywall installation in Albany a fixed price in Edmonton?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Albany Edmonton

Drywall installation in Albany — hung straight, screwed off right