Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Do you do drywall installation in Pembina?

Yes — Pembina is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

For Pembina exterior basement walls, what board do you use?

In Pembina, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Pembina home.

How do you handle texture matching after drywall installation work in Pembina?

Texture matching is part of every repair and patch job we do in Pembina. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

Drywall Installation Pembina Edmonton | Board & Tape

Drywall installation in Pembina, hung straight and screwed off right

The Pembina finish is only as good as the boarding under it. We board Pembina level with proper screws, framed seams and tidy cuts around corners and mechanical. Pembina is a higher-end Northwest community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover Pembina, Albany, Athlone, Baranow and the surrounding area, 7 days a week.

Drywall boarding and hanging in Pembina — new builds and renovations
Renovation reboarding — removing old board, installing new to current spec
Room additions, garage conversions and flex room boarding
Basement development boarding in Pembina — ceiling first, then walls
Ready for taping when we leave an Pembina job — no rework
Left ready for taper — no rework needed
No rework in Pembina — the board is ready for tape when we go

Drywall installation work we do in Pembina in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Pembina, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Our drywall installation process in Pembina in Edmonton, step by step

Ceiling board first — always — in Pembina homes

Every boarding job in Pembina starts with the ceiling. In Pembina we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Pembina order and the ceiling joints go unsupported and crack. In Pembina, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Pembina

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Pembina, every seam lands on framing, never mid-bay. In Pembina, every inside and outside corner is square and clean. In Pembina, board stops clean at window and door frames. When the boarding is done in an Pembina home, every surface is at the right plane and the taping crew can go straight to work.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Albany, Athlone, Baranow and Edmonton, 7 days a week — every established and newer Edmonton community from Albany, Athlone, Baranow to Albany, Athlone, Baranow. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Our Drywall Installation process in Pembina in Edmonton

Assess before we start — always in Pembina

Every job in Pembina starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Pembina

When we leave your Pembina home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Pembina wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Pembina jobs. We hold Pembina board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Why Pembina homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Pembina taping problem we have fixed was a boarding problem first. We board every Pembina job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Pembina and Northwest, 7 days a week. For Pembina homeowners: free quote, fixed number, backed workmanship. Any issue on an Pembina boarding job earns a return trip and a proper fix.

How it works

Simple, clean, on schedule — Drywall Installation in Pembina Edmonton

Free quote

We come out to your Pembina Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Pembina Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Pembina Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Pembina Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Pembina Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Pembina Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Pembina Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Pembina Edmonton

Drywall Installation Pembina Edmonton: your questions answered

Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
Do you do drywall installation in Pembina in Edmonton?: Yes — Pembina is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
For Pembina exterior basement walls, what board do you use?: In Pembina, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Pembina home.
How do you handle texture matching after drywall installation work in Pembina in Edmonton?: Texture matching is part of every repair and patch job we do in Pembina. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Pembina Edmonton

Drywall installation in Pembina, hung straight and screwed off right