For Northmount exterior basement walls, what board do you use?

In Northmount, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Northmount home.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Northmount: the quoted timeline is the real one. The taping crew can usually start the next day.

What board do you use on exterior basement walls in Edmonton?

In Northmount, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Northmount interior walls get standard 1/2” board. Legal suites in Northmount take 5/8” Type X on the ceiling and soundproof party walls. Each Northmount surface gets its board product confirmed at the quote.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Albany, Athlone, Baranow, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Do you serve Northmount on weekends?

Yes — we cover Northmount and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.

Do you do drywall installation in Northmount?

Yes — Northmount is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

Drywall Installation Northmount Edmonton | Board & Tape

Drywall installation in Northmount, hung straight and screwed off right

Good drywall installation is what makes a good Northmount finish possible — seams on framing, the right screw pattern, board plumb before a single coat of mud goes on. In Northmount we board new builds, basements and renovations the way a finishing specialist wants it boarded. Northmount is an older Northwest community where settling cracks, aging texture and the occasional plaster repair come up, so the installation work here is usually settling cracks, aging stipple and the odd plaster repair. We cover Northmount, Albany, Athlone, Baranow and Northwest, 7 days a week.

Ceiling-then-walls basement boarding across Northmount
Northmount screw spacing to spec, seams landed on framing
No rework in Northmount: tape-ready boarding when we go
Northmount basements boarded in order: ceiling, then walls
Basement development boarding in Northmount — ceiling first, then walls
Exterior and wet-area Northmount walls boarded moisture-resistant
Suite separations in Northmount boarded fire-rated and soundproof

Drywall board types used in Northmount homes

Standard 1/2” drywall — the right choice for most Northmount walls

Standard 1/2” drywall is correct for interior walls and ceilings in Northmount homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Northmount walls and ceilings should be. Most interior walls and ceilings in Northmount homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Northmount

Exterior basement walls in Northmount homes need moisture-resistant board. In Northmount, every bathroom and laundry wall takes moisture-resistant board. An Northmount suite ceiling must carry 5/8” Type X fire-rated board. In Northmount, the suite-to-main party wall takes STC soundproof board. The right board per Northmount surface is set at the quote for a clean inspection.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Northmount wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Northmount jobs. We hold Northmount board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Northmount house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

What affects the cost of drywall installation in Northmount in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Northmount comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Northmount

The work here usually calls for settling cracks, nail pops and tired texture. The Northmount quote maps each surface to its correct board — no inspection surprises.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Northmount bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Northmount, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Board layout is decided before the first sheet

Where the joints land

On an Northmount wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

How it works

Simple, clean, on schedule — Drywall Installation in Northmount Edmonton

Free quote

We come out to your Northmount Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Northmount Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Northmount Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Northmount Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Northmount Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Northmount Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Northmount Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Northmount Edmonton

Drywall Installation Northmount Edmonton: your questions answered

For Northmount exterior basement walls, what board do you use?: In Northmount, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Northmount home.
How long does drywall installation take in a Edmonton home in Edmonton?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Northmount: the quoted timeline is the real one. The taping crew can usually start the next day.
What board do you use on exterior basement walls in Edmonton?: In Northmount, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Northmount interior walls get standard 1/2” board. Legal suites in Northmount take 5/8” Type X on the ceiling and soundproof party walls. Each Northmount surface gets its board product confirmed at the quote.
Do you cover all of Edmonton for drywall installation in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Albany, Athlone, Baranow, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
Do you serve Northmount on weekends?: Yes — we cover Northmount and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.
Do you do drywall installation in Northmount in Edmonton?: Yes — Northmount is part of our regular service area, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Northmount Edmonton

Drywall installation in Northmount, hung straight and screwed off right