Attic Insulation Southwest Edmonton

Attic Insulation Southwest Edmonton

Attic Insulation
Attic Insulation Edmonton

Blown attic insulation in Southwest Edmonton, Edmonton — even coverage to the eaves, depth markers left in place so the finished depth is verifiable.

Get My Free Quote Call (403) 829-8702

Emplastrum Drywall 5-Star Google Reviews
Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing
Blown-in attic insulation in Southwest Edmonton, sealed before it is filled

Blown-in attic insulation in Southwest Edmonton, sealed before it is filled

Attics in Southwest Edmonton lose depth over time — insulation settles, someone crawls through it for a wiring job, and the corners near the eaves are usually thin to begin with. A top-up is only worth doing if the baffles are clear and the ceiling below is sealed, so that is what we check before quoting.

Watch

Attic Insulation Southwest Edmonton

Watch attic insulation jobs in Southwest Edmonton on our YouTube channel

Storage in the attic and the insulation you lose

Boards over joists compress everything

Where a Southwest Edmonton homeowner has laid plywood across the joists for storage, the insulation beneath is squashed to joist depth. That strip performs at a fraction of the rest of the attic.

Options

Either the storage area is raised on a platform above the finished insulation depth, or it is accepted as a deliberately weaker zone kept as small as possible. What does not work is topping up around it and pretending the platform is not there.

Attic Insulation in every Southwest Edmonton community

Where we work in Southwest Edmonton

We cover attic insulation across Southwest Edmonton. Pick your community below for the detail that applies to your street.

Depth, and how to check we delivered it

Verifiable rather than assumed

Blown insulation settles, and depth is easy to claim and hard to check once the hatch is closed. We leave depth markers through the Southwest Edmonton attic so the installed depth can be read off later by anyone.

Even coverage

Depth is also an average — a deep drift in the middle and thin corners is not the same as an even blanket. Coverage to the edges is what actually reduces heat loss.

Insulating a Southwest Edmonton attic with knob-and-tube or old wiring

Stop and check first

Some older Southwest Edmonton homes still carry active knob-and-tube wiring in the attic. Burying it in insulation is not something we do — it needs an electrician to assess and usually to replace before the attic is filled.

Why we raise it

It is the kind of thing found halfway through a job, and it is far cheaper to find at the quote. If we see it, we tell you and we stop until it is dealt with.

Cellulose against fibreglass in an Southwest Edmonton attic

Two products, different behaviour

Blown cellulose is denser, settles into gaps well and resists air movement through it better. Blown fibreglass is lighter, does not settle as much over time and is less prone to holding moisture.

How we choose

Either performs when installed to the right depth with the ceiling sealed underneath. We pick based on what is already up there and how the attic is built, and we tell you which we would use and why rather than defaulting to whichever is on the truck.

Depth is the whole number

What you are buying

Attic performance is almost entirely a function of settled depth and even coverage. Two attics with the same product can perform very differently.

How we handle it

Depth markers are set before blowing so the result is measurable rather than asserted, and the Southwest Edmonton attic is checked at the corners rather than only where the hatch is. An attic that is deep in the middle and thin at the perimeter is the usual finding.

Why air sealing comes before insulation in Southwest Edmonton

Insulation does not stop air

Batt and loose-fill slow heat transfer; neither stops air movement. In an Southwest Edmonton attic warm moist household air rises through pot lights, top plates and the hatch, passes straight through the insulation and condenses when it hits the cold deck.

What that looks like later

Frost on the underside of the sheathing in February, then staining on the ceiling in spring. Sealing the penetrations first is the difference between insulation that works and insulation that becomes the problem.
How it works

Simple, clean, on schedule — Attic Insulation in Southwest Edmonton

1

Free quote

We come out to your Southwest Edmonton property, take a real look at the attic insulation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every attic insulation quote in Southwest Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the attic insulation in Southwest Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Southwest Edmonton home while we finish the attic insulation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished attic insulation with us and you're happy with the result in Southwest Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the attic insulation contractor Southwest Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your attic insulation project in Southwest Edmonton.

Read our reviews on Google
FAQ — Attic Insulation Southwest Edmonton

Attic Insulation Southwest Edmonton: your questions answered

How do I know I got the depth I paid for?
We leave depth markers through the attic so the installed depth can be read off by anyone afterwards. Depth is easy to claim and hard to check once the hatch is closed, which is exactly why we mark it.
Why is the area above my exterior walls always cold?
Geometry. The roof meets the wall at the lowest point in the attic, so there is least room exactly where it is needed most. Baffles hold insulation back from the soffit vents while letting depth carry over the wall plate.
Will insulating my attic stop the ice at my eaves?
Often it helps a great deal, because ice damming is usually escaping heat melting snow that then refreezes over the cold overhang. Air sealing plus even coverage to the eaves lowers the deck temperature, which is the actual cause.
Do you insulate over an addition or a vaulted ceiling?
Those need looking at specifically rather than quoting an average depth. Shallow attics, cathedral sections and knee walls are usually the coldest rooms in an Southwest Edmonton house and the parts a general top-up misses.
Should I block the vents to stop drafts?
No. The attic is meant to run close to outdoor temperature so the roof deck stays cold. Blocking soffit vents causes exactly the ice damming people add insulation to prevent.
Can I add over the old insulation?
Usually yes, if it is dry, even and uncontaminated. If it is wet, compacted, rodent-affected or hiding unsealed penetrations, removing it first is worth the cost, and we tell you which one we found.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Attic Insulation in every Southwest Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook