Attic Insulation Blackburne Edmonton

Attic top-ups in Blackburne that hold their depth

Attics in Blackburne lose depth over time — insulation settles, someone crawls through it for a wiring job, and the corners near the eaves are usually thin to begin with. A top-up is only worth doing if the baffles are clear and the ceiling below is sealed, so that is what we check before quoting.

• Depth markers left in place so the result is verifiable
• Air sealing at pot lights, top plates and the attic hatch
• Existing insulation levelled before the top-up
• Baffles kept clear so the soffit vents still breathe
• Blown-in loose-fill to the depth your permit specifies
• Attic hatch insulated and weatherstripped

Attic Insulation Blackburne Edmonton

Adding to what is already there

Blackburne drywall in context

Pot lights, and which ones can be covered

Keeping the eaves clear in an Blackburne attic

The attic hatch, which everybody forgets

Attics over additions and vaulted areas

The attic hatch nobody insulates

Simple, clean, on schedule — Attic Insulation in Blackburne Edmonton

Attic Insulation Blackburne Edmonton: your questions answered

My bathroom fan seems to vent into the attic. Is that a problem?

Yes, and it needs correcting before insulating. It dumps warm wet air into the coldest part of the house, and burying it under fresh insulation hides a moisture source that will show up later as frost and staining.

How do I know I got the depth I paid for?

We leave depth markers through the attic so the installed depth can be read off by anyone afterwards. Depth is easy to claim and hard to check once the hatch is closed, which is exactly why we mark it.

Will insulating my attic stop the ice at my eaves?

Often it helps a great deal, because ice damming is usually escaping heat melting snow that then refreezes over the cold overhang. Air sealing plus even coverage to the eaves lowers the deck temperature, which is the actual cause.

Cellulose or fibreglass?

Both work when installed to depth with the ceiling sealed underneath. Cellulose is denser and resists air movement better; fibreglass is lighter and settles less. We pick based on what is already up there and tell you why.

Will you block my soffit vents?

No. Baffles hold the insulation back at the eaves so air can still move from the soffits to the ridge. A blocked attic gets damp no matter how much insulation is in it.

Can I add over the old insulation?

Usually yes, if it is dry, even and uncontaminated. If it is wet, compacted, rodent-affected or hiding unsealed penetrations, removing it first is worth the cost, and we tell you which one we found.