Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Framing in Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene, square and ready for drywall

Turning an unfinished basement or an open floor plan into real rooms starts with the frame. In Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene we build wood-frame basement development layouts and interior partition walls — squared, plumbed and spaced for the drywall going over them. We frame interior, non-load-bearing walls only; a licensed structural engineer handles anything load-bearing. Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene is an older West Edmonton community where settling cracks, aging texture and the occasional plaster repair come up, so framing here often means reworking walls that have shifted or been altered over the decades, alongside basement development. The same crew that frames can board, tape and finish too, so there is no handoff between trades. We cover Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene and West Edmonton, 7 days a week.

Framing West Edmonton

Watch framing jobs in West Edmonton on our YouTube channel

Crowning studs and checking for bow

Every stud has a curve

Lumber is rarely straight. Crowning means sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent.

What happens without it

Studs set randomly give a wall that waves in and out, and in an West Edmonton room with a window running along it, that shows through the finished paint no matter how good the taping.

Framing in every West Edmonton community

Where we work in West Edmonton

We cover framing across West Edmonton. Pick your community below for the detail that applies to your street.

Our Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene framing process in Edmonton, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene for the stage that follows.

Our West Edmonton framing process, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your West Edmonton space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in West Edmonton for the stage that follows.

Why West Edmonton homeowners trust Emplastrum for framing

Framed by the people who finish it

As a drywall and finishing company first, we frame walls the way we want to board and tape them — square, plumb and consistent — because no amount of mud hides a crooked frame in West Edmonton.

Fixed price, same-day reply

We cover West Edmonton, Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene and West Edmonton, 7 days a week. Free on-site quotes and fixed prices, and we stand behind the work.

Leaving room for mechanical and electrical

Framing comes first, services follow

An West Edmonton frame that leaves nowhere for a duct or a drain forces the mechanical trades to notch and drill in ways that weaken it.

Coordination

We would rather walk the layout with the other trades before framing than have them cut through a stud we set. It is a short conversation that avoids a structural argument later.

Steel studs against wood in a West Edmonton basement

Different tools for different jobs

Steel is straight, will not warp, does not burn and does not rot, which suits a basement or a shop. Wood takes fasteners anywhere and is easier for backing and heavy fixings.

How we choose

Often a mix — steel for the long partition runs where straightness matters, wood where cabinets and heavy items are going. We will say which we would use where and why.

Simple, clean, on schedule — Framing in West Edmonton

1

Free quote

We come out to your West Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in West Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in West Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your West Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in West Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor West Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in West Edmonton.

Read our reviews on Google

Framing West Edmonton: your questions answered

Can the same crew do the drywall after framing in West Edmonton?
Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you build bulkheads around ducting in Aldergrove, Belmead, Callingwood North, Callingwood South, Cameron Heights, Dechene?
Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.
Should basement framing touch the concrete in Edmonton?
No. That puts wood and insulation against a cold and sometimes damp surface with no way to dry. The wall is held off, or a rigid layer goes on the concrete first. It costs an inch of floor and saves a musty basement.
Can you add backing for a TV mount and shelves?
Yes, and tell us before the wall closes. Adding backing while it is open takes minutes; finding it missing afterwards means opening the wall or relying on anchors that eventually pull out. We ask what is going on the walls first.
What is crowning a stud?
Sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent. Studs set randomly give a wall that waves, and in an West Edmonton room with a window running along it that shows through the paint.
Can you take out this wall?
Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Framing in every West Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook