What is crowning a stud?

Sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent. Studs set randomly give a wall that waves, and in an Ormsby Place room with a window running along it that shows through the paint.

Can the same crew do the drywall after framing in Ormsby Place?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Do you frame basement developments in Ormsby Place?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.

Can you take out this wall?

Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.

Do you frame basement developments in Ormsby Place?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.

Do you build bulkheads around ducting in Ormsby Place?

Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Framing Ormsby Place Edmonton | Stud Walls

Framing in Ormsby Place, set out for the board that follows

Stud spacing matched to the drywall going over it
Wood-frame basement development layouts in Ormsby Place
Aldergrove, Belmead, Callingwood North coverage — we come to you
Frame-to-finish: one crew frames, boards, tapes and finishes
Wood-frame basement development layouts in Aldergrove, Belmead, Callingwood North
Bulkheads and soffits for ductwork and lighting
Interior partition walls framed square and plumb

Why Ormsby Place homeowners trust Emplastrum for framing in Edmonton

Framed by the people who finish it

As a drywall and finishing company first, we frame walls the way we want to board and tape them — square, plumb and consistent — because no amount of mud hides a crooked frame in Ormsby Place.

Fixed price, same-day reply

We cover Ormsby Place, Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week. Free on-site quotes and fixed prices, and we stand behind the work.

Ormsby Place drywall in context

About Ormsby Place

Named for the man responsible for developing Edmonton's grid system of numbering streets and avenues, Ormsby Place is located in the City's west end.

What we see in Ormsby Place

In Ormsby Place the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Steel studs against wood in a Ormsby Place basement

Different tools for different jobs

Steel is straight, will not warp, does not burn and does not rot, which suits a basement or a shop. Wood takes fasteners anywhere and is easier for backing and heavy fixings.

How we choose

Often a mix — steel for the long partition runs where straightness matters, wood where cabinets and heavy items are going. We will say which we would use where and why.

Bulkheads, and why they are never straight by accident

Boxing what has to stay

Ormsby Place basements are full of ducts, beams and plumbing that cannot move. Bulkheads box them, and each one adds corners.

Getting them right

A bulkhead framed slightly out of square is obvious once it is boarded, because the eye follows its long lines. They take longer than their size suggests and they are worth the extra care.

Basement framing against foundation walls in Edmonton

Hold it off the concrete

Framing tight against an Ormsby Place foundation wall puts wood and insulation against a cold, sometimes damp surface with no way to dry.

How it is done

The wall is held off, or a rigid layer goes on the concrete first. It costs an inch or two of floor space and it is the difference between a basement that stays dry and one that smells musty in year two.

Our Ormsby Place framing process in Edmonton, step by step

Layout before lumber

We chalk the plate lines from the plan or your walk-through direction and confirm every wall location in your Aldergrove, Belmead, Callingwood North space before anything is cut.

Square, plumb, spaced right

We frame the walls square and plumb with stud spacing matched to the board going over them — the frame stage is where a wavy wall gets built or avoided. See our basement drywall work in Aldergrove, Belmead, Callingwood North for the stage that follows.

Door and window openings

Square, plumb and the right size

An opening framed even slightly out means the door will not hang properly, and no amount of shimming fully fixes a twisted opening.

What we check

Diagonals measured rather than eyeballed, and the rough opening sized to the actual door being installed rather than a standard assumed. Getting the real door dimensions before framing saves a return visit.

How it works

Simple, clean, on schedule — Framing in Ormsby Place Edmonton

Free quote

We come out to your Ormsby Place Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Ormsby Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Ormsby Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ormsby Place Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Ormsby Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Ormsby Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Ormsby Place Edmonton.

Read our reviews on Google

FAQ — Framing Ormsby Place Edmonton

Framing Ormsby Place Edmonton: your questions answered

What is crowning a stud?: Sighting each stud and setting them all with the bow facing the same way so the wall plane is consistent. Studs set randomly give a wall that waves, and in an Ormsby Place room with a window running along it that shows through the paint.
Can the same crew do the drywall after framing in Ormsby Place in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you frame basement developments in Ormsby Place?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
Can you take out this wall?: Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.
Do you frame basement developments in Ormsby Place?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
Do you build bulkheads around ducting in Ormsby Place?: Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Framing Ormsby Place Edmonton

Framing in Ormsby Place, set out for the board that follows