Batt Insulation Southwest Edmonton

Batt Insulation Southwest Edmonton

Batt Insulation
Batt Insulation Edmonton

Batt insulation in Southwest Edmonton, Edmonton — walls, ceilings and rim joists insulated properly, because a compressed batt loses much of what you paid for.

Get My Free Quote Call (403) 829-8702

Emplastrum Drywall 5-Star Google Reviews
Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing
Batt insulation in Southwest Edmonton before the vapour barrier goes on

Batt insulation in Southwest Edmonton before the vapour barrier goes on

Most of what separates good batt work from bad in Southwest Edmonton is invisible once the drywall is on. That is exactly why it is worth doing carefully: nobody can inspect it later without opening the wall, and the difference shows up as a cold room rather than as a visible defect.

Watch

Batt Insulation Southwest Edmonton

Watch batt insulation jobs in Southwest Edmonton on our YouTube channel

Garage-to-house walls and ceilings

Two jobs at once

The wall between an Southwest Edmonton garage and the house, and the ceiling under living space, usually need a fire separation as well as insulation. The two have to be planned together because the board and the assembly are specified.

Sequencing

Insulation and vapour control go in, get inspected, then the rated board goes on. Doing it in the wrong order means opening a finished rated assembly, which is the expensive way to discover the sequence.

Batt Insulation in every Southwest Edmonton community

Where we work in Southwest Edmonton

We cover batt insulation across Southwest Edmonton. Pick your community below for the detail that applies to your street.

Mineral wool against fibreglass in Southwest Edmonton

Different tools

Fibreglass batts are the common choice and perform well when fitted properly. Mineral wool is denser, holds its shape better in a cavity, handles fire differently and performs noticeably better for sound.

Where we would spend the difference

Party walls, bedrooms, mechanical rooms and any assembly where sound or fire matters. For an ordinary interior partition in Southwest Edmonton, fibreglass fitted well beats mineral wool fitted badly.

Insulating an existing Southwest Edmonton wall without opening it

The honest limits

Batts need an open cavity. If a Southwest Edmonton wall is finished and staying finished, batts are not the product — that is a job for a blown-in or injected material, or for adding insulation on the room side.

What we say

We would rather tell you batts are the wrong answer for a closed wall than sell you a partial job. Where the wall is already open for other work, that is the moment to insulate properly.

Cathedral ceilings and leaving the air gap

Do not fill it completely

A vented cathedral ceiling in an Southwest Edmonton home needs a clear air channel between the insulation and the roof sheathing.

Why

Packing the rafter bay full removes the ventilation that keeps the deck cold and dry, which is how a warm sloped ceiling ends up with a damp deck. Baffles hold the channel open.

Sound as a side effect of insulating

You get some for free

Filling an interior Southwest Edmonton wall cavity with batts noticeably reduces voice and television noise between rooms, even when sound was not the reason for the job.

Where to spend a little more

If a bedroom, office or bathroom wall is being opened anyway, upgrading that specific cavity to a denser acoustic or mineral wool batt costs very little on top of work already happening. We will point out which walls those are while we are quoting.

Insulating a Southwest Edmonton basement wall against concrete

Not the same as a framed wall above grade

A basement wall in Southwest Edmonton is concrete, cold, and can carry moisture from the ground. Batts pressed straight against bare concrete sit in exactly the wrong place: the cold side, where any moisture they pick up cannot dry.

How the assembly works

The framing is held off the concrete, or a rigid layer goes against the wall first, so the batts sit in a cavity that stays on the warm side. Getting that order wrong is the usual reason a finished Southwest Edmonton basement smells musty a year later.
How it works

Simple, clean, on schedule — Batt Insulation in Southwest Edmonton

1

Free quote

We come out to your Southwest Edmonton property, take a real look at the batt insulation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every batt insulation quote in Southwest Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the batt insulation in Southwest Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Southwest Edmonton home while we finish the batt insulation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished batt insulation with us and you're happy with the result in Southwest Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the batt insulation contractor Southwest Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your batt insulation project in Southwest Edmonton.

Read our reviews on Google
FAQ — Batt Insulation Southwest Edmonton

Batt Insulation Southwest Edmonton: your questions answered

My room is cold and draughty. Will batts fix it?
Probably not on their own. Draughts around windows, an unsealed rim joist or gaps at the top plate are air leaks, and insulation does not stop air. We would rather diagnose the draught and quote the sealing, which is usually the cheaper half.
Can you fill my vaulted ceiling completely?
No, and it matters. There has to be an air channel between the insulation and the roof sheathing so the roof can dry. Packing it tight leads to damp sheathing and eventually rot, none of it visible until it is expensive.
What about the pipes in my exterior wall?
Insulation goes behind them, between the pipe and the outside, not stuffed in around them. A water line on the cold side of the batt is a freeze risk in an Alberta winter, not just an efficiency question.
Does the garage wall need anything special?
Usually yes — a fire separation as well as insulation, planned together because the board is specified. Insulation and vapour control go in and get inspected, then the rated board goes on.
Will insulating an interior wall help with noise?
Yes, noticeably for voices and television, even when sound was not the reason for the job. If a bedroom or office wall is open anyway, upgrading that cavity to a denser batt costs very little on top.
Should batts be stapled tight to the studs?
The face-stapling shortcut dishes the middle of the batt and leaves a void behind it. A batt should sit by friction across its full width, touching framing on both sides and the sheathing behind.
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Batt Insulation in every Southwest Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook