Can my Secord electrician and plumber rough in around your framing?

Yes — in Secord we frame in a sequence that lets electrical and plumbing rough in before close-up.

Do you stand behind your framing work in Secord?

Yes. We check every Breckenridge Greens, Edgemont, Glastonbury layout is square before we hand it off, and if something is not right we come back and make it right.

Can you mix steel and wood?

Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.

Do you frame basement development layouts in Secord?

Yes — framing an Breckenridge Greens, Edgemont, Glastonbury basement layout to plan, ready for insulation and drywall, is among our most common metal stud jobs. We also cover Breckenridge Greens, Edgemont, Glastonbury and West Henday.

Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Do you also do the drywall after framing in Secord?

Yes — one Secord contract covering frame and drywall, or just the framing for your own drywall crew.

Metal Stud Framing Secord Edmonton | Steel Studs

Metal stud framing in Secord, square and ready for drywall

The frame decides the finish: crooked studs, crooked Secord walls. In Secord we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Secord is an West Henday community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Secord, Breckenridge Greens, Edgemont, Glastonbury and West Henday, 7 days a week.

Secord rough openings — doors and windows — framed exactly to spec
To-spec door and window openings in every Secord frame
Breckenridge Greens, Edgemont, Glastonbury door and window rough openings framed to spec
Coordinated with electrical and plumbing rough-in
Secord door and window rough openings framed to spec
Track and stud layout to code — the base for Secord board
Steel-stud partition wall framing in Breckenridge Greens, Edgemont, Glastonbury

Common metal stud framing situations in Secord in Edmonton

In Secord, secord sits in Edmonton's West Henday district. Secord is a neighbourhood in west Edmonton, Alberta, Canada that was established in 2007 through the adoption of the Secord Neighbourhood Structure Plan (NSP). Across roughly 1,165 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Secord and the surrounding West Henday district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

Secord drywall in context

About Secord

Secord is a neighbourhood in west Edmonton, Alberta, Canada that was established in 2007 through the adoption of the Secord Neighbourhood Structure Plan (NSP).

What we see in Secord

In Secord the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Boarding onto steel

Different screws, different technique

Steel takes fine-thread screws rather than coarse, and over-driving strips the stud rather than dimpling neatly.

Why crew matters

A crew used to wood will strip fasteners in steel until they adjust. When the same crew frames and boards an Secord wall, that adjustment has already happened before the first sheet goes up.

Our Secord metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Secord space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Secord once the frame is up.

Sound behaviour of steel walls

Actually an advantage

Steel studs are less rigid than wood and transmit vibration less efficiently, so a steel-framed Secord partition often performs slightly better acoustically than the same wall in wood.

Do not over-claim it

The difference is real but modest. If sound is the goal, the assembly — insulation, layers and sealing — matters far more than the stud material.

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

Cost, and when steel is actually cheaper

Material against labour

Steel is often competitive on material and can be faster to set out on a large straight run. On small, irregular Secord jobs with lots of backing and odd angles, wood is usually quicker.

How we quote

We price the material that suits the job rather than defaulting, and tell you where the difference actually comes from.

How it works

Simple, clean, on schedule — Metal Stud Framing in Secord Edmonton

Free quote

We come out to your Secord Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Secord Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Secord Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Secord Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Secord Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Secord Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Secord Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Secord Edmonton

Metal Stud Framing Secord Edmonton: your questions answered

Can my Secord electrician and plumber rough in around your framing?: Yes — in Secord we frame in a sequence that lets electrical and plumbing rough in before close-up.
Do you stand behind your framing work in Secord?: Yes. We check every Breckenridge Greens, Edgemont, Glastonbury layout is square before we hand it off, and if something is not right we come back and make it right.
Can you mix steel and wood?: Yes, and often that is the right answer — steel for the long straight partition runs, wood where cabinets, vanities or grab bars are going. We would rather explain the mix than sell one material for everything.
Do you frame basement development layouts in Secord?: Yes — framing an Breckenridge Greens, Edgemont, Glastonbury basement layout to plan, ready for insulation and drywall, is among our most common metal stud jobs. We also cover Breckenridge Greens, Edgemont, Glastonbury and West Henday.
Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.
Do you also do the drywall after framing in Secord?: Yes — one Secord contract covering frame and drywall, or just the framing for your own drywall crew.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Secord Edmonton

Metal stud framing in Secord, square and ready for drywall