Can you coordinate with my Falconer Heights electrician and plumber?

Yes — we sequence Aspen Gardens, Bearspaw, Blue Quill framing so your other trades can rough in cleanly before insulation and drywall go on.

Do you stand behind your framing work in Falconer Heights?

Yes. We check every Falconer Heights layout is square before we hand it off, and if something is not right we come back and make it right.

Do you coordinate Falconer Heights framing with electricians and plumbers?

Yes — trades rough in cleanly because the Falconer Heights framing is sequenced for them, ahead of insulation and drywall.

Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Do you frame basement development layouts in Falconer Heights?

Yes — we frame Falconer Heights basements to plan constantly — ready for insulation and drywall. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Does a steel wall count as fire-rated?

No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Metal Stud Framing Falconer Heights Edmonton | Steel Studs

Metal stud framing in Aspen Gardens, Bearspaw, Blue Quill, square and ready for drywall

Straight Falconer Heights walls start with a straight frame — there is no other way. In Falconer Heights we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Falconer Heights is an Whitemud community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Falconer Heights, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Bulkheads and soffits for ductwork and lighting
Falconer Heights coverage — we come to you
Aspen Gardens, Bearspaw, Blue Quill track and stud spacing set to code for the drywall going over it
Aspen Gardens, Bearspaw, Blue Quill coverage — we come to you
Falconer Heights rough openings — doors and windows — framed exactly to spec
To-spec door and window openings in every Falconer Heights frame
Spacing to code on Falconer Heights track and studs so the drywall lands right

Common metal stud framing situations in Falconer Heights in Edmonton

In Falconer Heights, falconer Heights sits in Edmonton's Whitemud district. Falconer Heights was named after James F. Falconer, who was involved in the formation of Edmonton's Names Advisory Committee in the mid 1950s and served on the committee until 1979. Across roughly 585 homes here, the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We cover Falconer Heights and the surrounding Whitemud district, 7 days a week. Free on-site quote, one fixed price, and work that holds up after.

Falconer Heights drywall in context

About Falconer Heights

Falconer, who was involved in the formation of Edmonton's Names Advisory Committee in the mid 1950s and served on the committee until 1979.

What we see in Falconer Heights

In Falconer Heights the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Track, studs and how the wall goes together

Different system entirely

Steel framing is track at floor and ceiling with studs inserted and fastened, rather than plates and nails.

Why layout is faster

The track is set to the line first, so the wall position is fixed before a single stud goes in. On a large Falconer Heights layout that makes setting out quicker and more accurate than stick framing.

Why Falconer Heights homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Falconer Heights.

Fixed price, same-day reply

We cover Falconer Heights and Whitemud, 7 days a week. Free at-home Falconer Heights quoting, fixed pricing, and work we stand behind.

Framing for basements and openings in Falconer Heights

Basement development layouts

A basement development layout is the most common metal stud job we do in Falconer Heights — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Falconer Heights wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

Our Falconer Heights metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Falconer Heights space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Falconer Heights once the frame is up.

How it works

Simple, clean, on schedule — Metal Stud Framing in Falconer Heights Edmonton

Free quote

We come out to your Falconer Heights Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Falconer Heights Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Falconer Heights Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Falconer Heights Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Falconer Heights Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Falconer Heights Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Falconer Heights Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Falconer Heights Edmonton

Metal Stud Framing Falconer Heights Edmonton: your questions answered

Can you coordinate with my Falconer Heights electrician and plumber?: Yes — we sequence Aspen Gardens, Bearspaw, Blue Quill framing so your other trades can rough in cleanly before insulation and drywall go on.
Do you stand behind your framing work in Falconer Heights?: Yes. We check every Falconer Heights layout is square before we hand it off, and if something is not right we come back and make it right.
Do you coordinate Falconer Heights framing with electricians and plumbers?: Yes — trades rough in cleanly because the Falconer Heights framing is sequenced for them, ahead of insulation and drywall.
Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.
Do you frame basement development layouts in Falconer Heights?: Yes — we frame Falconer Heights basements to plan constantly — ready for insulation and drywall. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Does a steel wall count as fire-rated?: No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Falconer Heights Edmonton

Metal stud framing in Aspen Gardens, Bearspaw, Blue Quill, square and ready for drywall