Can you coordinate with my Cloverdale electrician and plumber?

Yes — we sequence Avonmore, Bonnie Doon, Capilano framing so your other trades can rough in cleanly before insulation and drywall go on.

Can my Cloverdale electrician and plumber rough in around your framing?

Yes — in Cloverdale we frame in a sequence that lets electrical and plumbing rough in before close-up.

Is steel framing more expensive?

Often competitive on material and faster to set out on a large straight run. On small irregular Cloverdale jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.

Do you frame door and window openings in Cloverdale?

Yes — Avonmore, Bonnie Doon, Capilano rough openings are framed to spec as part of the wall layout.

Is steel better for soundproofing?

Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.

Do you stand behind your framing work in Cloverdale?

Yes. We check every Avonmore, Bonnie Doon, Capilano layout is square before we hand it off, and if something is not right we come back and make it right.

Metal Stud Framing Cloverdale Edmonton | Steel Studs

Metal stud framing in Cloverdale, square and ready for drywall

Straight Cloverdale walls start with a straight frame — there is no other way. In Cloverdale we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Cloverdale is an Southeast community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Cloverdale, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

To-spec door and window openings in every Cloverdale frame
Cloverdale rough openings — doors and windows — framed exactly to spec
Cloverdale track and stud spacing set to code for the drywall going over it
Avonmore, Bonnie Doon, Capilano door and window rough openings framed to spec
Track and stud layout to code — the base for Cloverdale board
Bulkheads and soffits for ductwork and lighting
Cloverdale door and window rough openings framed to spec

Framing for basements and openings in Cloverdale

Basement development layouts

A basement development layout is the most common metal stud job we do in Avonmore, Bonnie Doon, Capilano — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Cloverdale drywall in context

About Cloverdale

Cloverdale is situated along the south bank of the North Saskatchewan River near the centre of the city.

What we see in Cloverdale

In Cloverdale the drywall work is settling cracks/nail pops, basement development, builder-grade L4->L5 upgrades. We confirm what your home actually needs on site, in writing, before anything starts.

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Cloverdale wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

Our Cloverdale metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Cloverdale space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Cloverdale once the frame is up.

Framing for basements and openings in Cloverdale

Basement development layouts

A basement development layout is the most common metal stud job we do in Cloverdale — framing bedrooms, bathrooms, a media room or a legal suite to the plan, ready for insulation and drywall.

Openings and bulkheads

We frame partition walls and bulkheads to hide ductwork and provide a clean, level surface for the ceiling and lighting trades.

Why Cloverdale homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Cloverdale.

Fixed price, same-day reply

We cover Cloverdale and Southeast, 7 days a week. Free at-home Cloverdale quoting, fixed pricing, and work we stand behind.

Backing in a steel wall

Plan it, because you cannot improvise

You cannot simply screw a heavy fixing into a steel stud web and trust it. Backing plates or wood blocking have to be built in where anything is being hung.

Ask before it closes

TV mounts, cabinets, grab bars, shelving, handrails. In an Cloverdale steel wall this is more important than in wood, because there is no fallback of hitting a stud.

How it works

Simple, clean, on schedule — Metal Stud Framing in Cloverdale Edmonton

Free quote

We come out to your Cloverdale Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Cloverdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Cloverdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Cloverdale Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Cloverdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Cloverdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Cloverdale Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Cloverdale Edmonton

Metal Stud Framing Cloverdale Edmonton: your questions answered

Can you coordinate with my Cloverdale electrician and plumber?: Yes — we sequence Avonmore, Bonnie Doon, Capilano framing so your other trades can rough in cleanly before insulation and drywall go on.
Can my Cloverdale electrician and plumber rough in around your framing?: Yes — in Cloverdale we frame in a sequence that lets electrical and plumbing rough in before close-up.
Is steel framing more expensive?: Often competitive on material and faster to set out on a large straight run. On small irregular Cloverdale jobs with lots of backing and odd angles, wood is usually quicker and cheaper. We price what suits the job.
Do you frame door and window openings in Cloverdale?: Yes — Avonmore, Bonnie Doon, Capilano rough openings are framed to spec as part of the wall layout.
Is steel better for soundproofing?: Slightly, because steel is less rigid and transmits vibration less efficiently than wood. The difference is real but modest — the assembly, insulation and sealing matter far more than the stud material.
Do you stand behind your framing work in Cloverdale?: Yes. We check every Avonmore, Bonnie Doon, Capilano layout is square before we hand it off, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Cloverdale Edmonton

Metal stud framing in Cloverdale, square and ready for drywall