Do you also do the drywall after framing in Casselman?

Yes — one Casselman contract covering frame and drywall, or just the framing for your own drywall crew.

Can you coordinate with my Casselman electrician and plumber?

Yes — we sequence Balwin, Bannerman, Belmont framing so your other trades can rough in cleanly before insulation and drywall go on.

Does a steel wall count as fire-rated?

No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.

Do you also do the drywall after framing in Casselman?

Yes — we frame and drywall Balwin, Bannerman, Belmont projects as one job with one point of responsibility, or frame only for your own crew.

Why use steel studs instead of wood?

They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.

Can I hang a TV on a steel-framed wall?

Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Metal Stud Framing Casselman Edmonton | Steel Studs

Metal stud framing in Balwin, Bannerman, Belmont, square and ready for drywall

A finished Casselman space is only as straight as the frame beneath it. In Casselman we build steel-stud partition walls, bulkheads and basement layouts — squared, plumbed and spaced to the drywall spec you need. Casselman is an Northeast community with a mix of older homes and newer builds, so framing calls range from straightforward basement layouts in the newer homes to repair and alteration work in the older ones nearby. We cover Casselman, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Steel-stud partition wall framing in Balwin, Bannerman, Belmont
Spacing to code on Casselman track and studs so the drywall lands right
Balwin, Bannerman, Belmont door and window rough openings framed to spec
Balwin, Bannerman, Belmont track and stud spacing set to code for the drywall going over it
Bulkheads and soffits for ductwork and lighting
Basement development layouts framed to plan
Casselman rough openings — doors and windows — framed exactly to spec

Gauge, and why it is not all the same steel

Thickness matters

Interior non-load-bearing partitions use a lighter gauge than walls carrying weight or spanning tall. Using the lightest available everywhere gives walls that feel flimsy and telegraph movement.

What we specify

Gauge to suit the wall height and what the wall has to carry. In an Casselman basement with an 8-foot ceiling that is straightforward; a tall stairwell wall is not.

Fire performance and rated assemblies

Non-combustible

Steel does not burn, which is why it appears in many rated assemblies. That does not make a steel wall rated on its own.

The assembly is what counts

A rated Casselman wall is a specified system — stud type and spacing, board type and layers, joint treatment. We build to the assembly on the drawings rather than assuming steel gives a rating by itself.

Running services through steel

Knockouts and grommets

Steel studs come with knockouts for wiring, and cables must be protected where they pass through — a bare cable against a cut steel edge is a hazard.

Coordination

Grommets or bushings go in as the wiring is run. We would rather walk the route with the electrician than have cables pulled through unprotected openings and discovered at inspection.

Our Casselman metal stud framing process in Edmonton, step by step

Layout first

We lay out track lines on the floor and ceiling from the plan or your walk-through direction, confirming every wall location before a single stud goes up in your Casselman space.

Frame square and plumb

We install track, cut and set the studs to spacing, and check every wall for square and plumb as we go — the framing stage is where a crooked wall gets built or avoided. See our basement drywall work in Casselman once the frame is up.

Why Casselman homeowners trust Emplastrum for metal stud framing in Edmonton

Square framing makes a flat finish possible

As a drywall and finishing company first, we frame walls the way we want to drywall them — square, plumb and properly spaced — because a crooked frame can never be fully hidden by finishing in Casselman.

Fixed price, same-day reply

We cover Casselman and Northeast, 7 days a week. Free at-home Casselman quoting, fixed pricing, and work we stand behind.

Boarding onto steel

Different screws, different technique

Steel takes fine-thread screws rather than coarse, and over-driving strips the stud rather than dimpling neatly.

Why crew matters

A crew used to wood will strip fasteners in steel until they adjust. When the same crew frames and boards an Casselman wall, that adjustment has already happened before the first sheet goes up.

How it works

Simple, clean, on schedule — Metal Stud Framing in Casselman Edmonton

Free quote

We come out to your Casselman Edmonton property, take a real look at the metal stud framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every metal stud framing quote in Casselman Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the metal stud framing in Casselman Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Casselman Edmonton home while we finish the metal stud framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished metal stud framing with us and you're happy with the result in Casselman Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the metal stud framing contractor Casselman Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your metal stud framing project in Casselman Edmonton.

Read our reviews on Google

FAQ — Metal Stud Framing Casselman Edmonton

Metal Stud Framing Casselman Edmonton: your questions answered

Do you also do the drywall after framing in Casselman?: Yes — one Casselman contract covering frame and drywall, or just the framing for your own drywall crew.
Can you coordinate with my Casselman electrician and plumber?: Yes — we sequence Balwin, Bannerman, Belmont framing so your other trades can rough in cleanly before insulation and drywall go on.
Does a steel wall count as fire-rated?: No. Steel is non-combustible, which is why it appears in many rated assemblies, but a rating comes from the whole specified system — stud spacing, board type, layers and joint treatment. We build to the assembly on the drawings.
Do you also do the drywall after framing in Casselman?: Yes — we frame and drywall Balwin, Bannerman, Belmont projects as one job with one point of responsibility, or frame only for your own crew.
Why use steel studs instead of wood?: They arrive straight and stay straight — no warping with humidity, no shrinking, no twisting a finished wall out of plane later. That matters most on long runs, tall walls and where the finish level is high.
Can I hang a TV on a steel-framed wall?: Only with backing built in. You cannot trust a heavy fixing into a steel stud web. Tell us before the wall closes and we add backing plates or blocking — there is no fallback of hitting a stud like there is in wood.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Metal Stud Framing Casselman Edmonton

Metal stud framing in Balwin, Bannerman, Belmont, square and ready for drywall